About Yi Fan XU

Yi Fan XU · 11-24-2014

Hi all, I am setting up new vpn connection for company using anyconnect.There is already few connection profiles which using certificate stored at smart card for authentication.The new vpn I am doing also uses certificate. However, this personal cert...

Yi Fan XU · 07-14-2014

Hi All!Recently I am trying to harden the switch and router snmp access.But I realized that I can only apply one acl, either IPv4 acl or IPv6 acl.Below are acl configuration.access-list 12 permit 192.168.160.120ipv6 access-list IPV6-SNMP-ACL deny ipv...

Yi Fan XU · 07-14-2014

Hi, first of all, thanks for reading my input. Recently have issue regarding SSL license activation.Customer purchase L-ASA-SSL-50= and L-ASA-SSL-250= for their ASA5540 to support 300 peers.I fulfill the two PAK keys together separated by commas, but...

Yi Fan XU · 01-28-2010

Hi All,I had issue on telnet.Recently, I have replaced an old module WS-X6408A-GBIC with new module WS-X6724-SFP for C6505-E core switch.After replacing, siter FM tried to telnet to remote core switch, but failed with error message as below:%SEC-4-TO...

Yi Fan XU · 07-14-2014

Thanks Marvin!Does Cisco have any doc regarding this non-stack behavior?As mentioned, Cisco can re-add 250= and remove 50=.But I am worry if I can install that re-add 250=.Because even Cisco can remove 50= at their system, the ASA still has that 50= ...

Yi Fan XU · 02-18-2010

Hi All,I have checked.This issue is a known IOS bug.To solve the problem, either upgrade the IOS or remove the ip security commands.Anyway, thanks for the help and information.Regards,laputaxyf

Member Since	‎01-28-2010 12:28 AM
Date Last Visited	‎09-25-2024 01:48 AM
Posts	6
Total Helpful Votes Received	10

User Statistics

User Activity

Disable prompt to login smart card when connect to particular vpn

Can not apply IPv4 and Ipv6 ACL concurrently to control snmp access

Anyconnect SSL Premium License not stackable

Telnet issue with error message "%SEC-4-TOOMANY : Box secured, too many options on internal packet"

Thanks Marvin!Does Cisco have

Re: Telnet issue with error message "%SEC-4-TOOMANY : Box secure