Are Cisco routers and switches capable to handle SNTP information (RFC 1769 format) from SNTP Time server and provide it farther to rest of a network?Here is a description of SNTP feature of Time Server>The TimeServer is a Simple Network Time Protoco...
Does anybody know what wavelenght (1310nm or 1550) uses 155-Mb Single-mode card (WAI-OC3-4SS) ? I`ve didnt found any specification about it. We want to connect Cat 8500 to ATM switch of other vendors.Thanks for response.
Hi,i need to answer customers question on me> Is there a possibility to encrypt traffic (DES, 3DES, AES...) on Catalyst 8540 and 8510? Thanks for help in advice!
Hi, we need to find out a proper Cisco routing/switching platform with integrated FW. I focus on Cat 4503-e with Supervisor 6-e. Its overall throughput is 320 Gbits, ethernet port is capable to work at wirespeed. But no datasheet does clarify through...
The ISDN switch type is net3 on both sides as configured. Simultaneously i`ve configured second backup link on another pair of routers, one side net3, oposite side net5 - and it start working immediately. So the problem is maybe IOS version.
There is no aaa new-model statment on both side.I`ve rewrite user/psw and added ppp chap hostname ... command.output of isdn status follows:cpp-poprad#Sep 20 14:52:00.647: %DIALER-6-BIND: Interface BR0/1/0:1 bound to profile Di0Sep 20 14:52:00.651: %...
Hi Frank,yes, you are right. Around 20 min was the page file at 780MB, the it felt down to cca 180MB. The time was very long. Nevermind, now i can continue with installing.Btw. the PC is IBM ThinkCentre, 2GB RAM, Intel Celeron 2.66GHzThank YouBRRicha...
