About mamdohmardini

mamdohmardini · 11-27-2016

Hi, We have ISE integrated with Active Directory and ASA integrated with ISE for Anyconnect user authentication. The problem we have is that any user is able to authenticate and is authorized to access through Anyconnect using any group policy on the...

mamdohmardini · 11-24-2016

Hi all,We have ISE1.4 integrated with active directory. And we have Cisco ASA 5520 (8.25) configured with group policies of local authentication on the ASA. We want to integrate the ASA with ISE and remove local users on the ASA and use authenticatio...

mamdohmardini · 10-27-2016

We have an office building need to be connected to the corporate network, the available switches are 6800ia-48fpd and the parent switch at the data center is 6880-x-le. The 6880ia uplink is connected through dark fiber link to the parent switch, we n...

mamdohmardini · 12-01-2015

we have a cisco ip phones connected to switch ports configured for dot1x wired authentication, ISE is configured to bypass authentication for ip phones. the switch used is Cisco 6880ia.

mamdohmardini · 12-18-2016

please check below link: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp/configuration/12-4/iap-12-4-book/iap-bph.html BR MTM

mamdohmardini · 12-17-2016

try the command show redundancy

mamdohmardini · 12-13-2016

did you try to update the WIFI driver?

mamdohmardini · 12-13-2016

Hi, Did the Anyconnect work before on this machine and now it is not working? or this is a new installation not tested before? BR MTM

mamdohmardini · 12-05-2016

If you have the following: 1- Configured VPN tunnels and remote access roles and policies. 2- monitoring tool that track the access. 3- Security penetration tests are successful. 4- Zero complaints. then there is nothing to do. BR MTM

Member Since	‎12-01-2015 08:18 AM
Date Last Visited	‎09-21-2020 09:31 AM
Posts	23
Total Helpful Votes Received	5

User Statistics

User Activity

Anyconnect configuration Integration of ASA group policies with Active directory OU's through ISE

Integrate Active Directory with ISE1.4 and Cisco Anyconnect

Can a fabric link be connected to parent switches through MPLS or Huawei RTN 310 link?

ISE 1.4 "ip phones frequent registration"

please check below link:

try the command show

did you try to update the

Hi,

If you have the following: