Hi Steven112,
The C6800-8p10g module does support VSS. The data sheet link InayathUlla Sharieff provided does list the C6800 module supports VSS. If you want to be absolutely sure you could contact your Cisco Sales Rep if you have one and verify wi...
Reza is correct. Bottom cable is your data stacking cable. Out of the box the 3850's will stack automatically. The stack master will be elected unless you give one a higher priority like Reza mentioned. The show switch command will give you detai...
You cannot have mixed speeds on both ends of your connections. In your case, the 3850 with 10G SFP will not link up with the 2960x with a 1G SFP. Check out this URL for the 3850 Network Module information:
http://www.cisco.com/c/en/us/td/docs/switc...
Do you have VTP pruning enabled? If so, the access layer switch trunk links will have VLANs pruned off the trunk links if there are no access ports assigned to those VLANs.
As soon as there are any broadcast or unicast frames on the new VLANs, th...
Sorry for my confusion, but is your DHCP server running on a server on your domain? When you configured your WDS server did you make sure to integrate it with Active Directory? When I was working on deploying Windows via MDT and WDS, I know I had t...