I currently have a site to site VPN running connecting a branch office and the Main office using a ASA 5510 and ASA 5505. currently PC's at the branch can access the network in the main office using interface 0/1, but we have added anoth...
That is correct, the 5505(inside and ping the 5510(inside), if it helps I have added all ping tests I have tried. Ping from 192.168.2.0 to 192.168.10.50 succeeded Ping from 192.168.2.0 to 192.168.20.100 failed Ping from 192.168.10.0 to 1...
Initiated the tunnel using this command.packet-tracer input inside tcp 192.168.10.50 1250 192.168.20.100 80 Ping from 5505(inside) to the 5510(Terranet) interface failed to get a response, but to 5510(inside) succeededResult of the command: "show cr...
The first tunnel was initiated from the remote side, but I haven't had to initiate it it been like that since it was first set up. Do I need to initiate every time I make a change?
