About Steve Dixon

Steve Dixon · 12-11-2014

I have an 881 router configured with 2 dhcp WAN connections. I am trying to configure failure detection of the primary connection (I do not really care about the secondary at this time).I have an ip sla/track configured to monitor the primary WAN co...

Steve Dixon · 09-28-2013

Situation:-RV042(v3) with latest firmware (as of today)-Remote user behind a Cisco ASA 5505 (runing 8.4 firmware) is not able to connect using the QuickVPN client-Quick always fails the "Verifying network" phase-QuickVPN can connect from other locati...

Steve Dixon · 09-15-2012

I have an ASA 5505 running 8.4.4.1. I've configured three WAN interfaces and have assigned failover on one of them (we have two ISP's, and a total of 3 static IP's in 3 different subnets). I've noticed that all the traffic is flowing through only o...

Steve Dixon · 12-02-2010

We upgraded our ASA 5505 to the 8.3(2) firmware image and we have a working VPN configuration (Windows VPN clients can connect and browse the office network as well as their local networks [split tunnel seems to work in this regard]). However, while...

Steve Dixon · 06-09-2014

Ref: Cisco Support Case 630249873I have confirmed with Cisco support that this is a feature not in the RV180 firmware.Adding it to the next release may not be possible so Cisco has opted replaced my unit with an RV180W that does support RADIUS authen...

Steve Dixon · 09-28-2013

I tried the info from the lnk above and was not successful.-creating three access rules for esp, udp/isakmp and udp/4500 did not resolve the issue-neither did adding the ipsec passthrough setting on the default inspection list (was worth a shot)-mayb...

Steve Dixon · 09-16-2012

Okay, logged a TAC and got it working:In this instance the only thing that needed to be changed was the NAT rule.My original rules were interface rules, which only worked on the default route (WAN1). Setting the "outside" value to the WAN2 interface...

Steve Dixon · 09-16-2012

The IP's we were assigned are next to each other:a.b.c.68/30 (.69 as theirs and .70 as ours)a.b.c.72/30 (.73 as theirs and .74 as ours)I may be able to get the ISP to combine them into a /29 group of consecutive usable IP's, but that will take some t...

Steve Dixon · 09-15-2012

I suspected as much, but that puts me in a tough spot as I've got two services that work on port 443 and neither can be changed to use another port. The OWA access is used by smart phones (no option to set/change the port) and the RDS Gateway does n...

Member Since	‎12-02-2010 09:50 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	13

User Statistics

User Activity

dual wan failover config: failback does not always work as expected for existing LAN traffic flows

Not able to connect to RV042 using QuickVPN client through remote ASA firewall

Trying configure ASA5505 (8.4) to allow https on two WAN ports at same time

Unable to browse internet while VPN connected (ASA5505 running 8.3)

Ref: Cisco Support Case

Not able to connect to RV042 using QuickVPN client through remot

Trying configure ASA5505 (8.4) to allow https on two WAN ports a

Trying configure ASA5505 (8.4) to allow https on two WAN ports a

Trying configure ASA5505 (8.4) to allow https on two WAN ports a