About leosoft

leosoft · 06-13-2021

Hi all,The following simple configuration run flawlessly on my C1111-8P and IOS XE 16. As you can see, I have a trunk ethernet port connected to a switch feeding my router with two VLANs (1 and 2). And both of my VLANS are bridged on two separate B...

leosoft · 06-12-2021

Hello guys,The following config is working flawlessly in a C886VA but in a C1111-8P and IOS XE 16 (or even 17) I experiencing a very strange issue. My bridged interface (now BDI2) seems that is never executing the authentication commands (authentica...

leosoft · 09-29-2020

Hello,I have a simple working IPv6 configuration with stateless autoconfig on Dialer1 and it is working fine. My config is this:! ipv6 unicast-routing ! ipv6 dhcp pool BVI1_DHCP import dns-server import domain-name ! interface Dialer1 description...

leosoft · 09-28-2020

Hello,I have a simple working IPv6 configuration with stateless autoconfig on Dialer1 and it is working fine. My config is this:! ipv6 unicast-routing ! ipv6 dhcp pool BVI1_DHCP import dns-server import domain-name ! interface Dialer1 description...

leosoft · 02-27-2020

Hello,I recently bought some 8821 to install them under asterisk 13. I am using the latest SIP firmware 8821.11-0-6-7 and my phones seems they are working as expected without issues while I install one single SIP account per phone. If you try to add ...

leosoft · 05-25-2023

Hello again,First of all lets make a correction to my previous post (almost 6 months ago). The problem with the registration of multiple SIP accounts (while you use Enterprise firmware) is related ONLY with 8821 and NOT with all 8800 series. I al...

leosoft · 11-19-2022

Hello,Two years from my last post in this thread and what I made sure is that no Cisco IP phone (exempt of 3PCC versions) are able to hold more than one line configured out of Cisco Call Manager. As @pieterh wrote before: "PHONE registers itself to ...

leosoft · 06-21-2021

Hello again,Finally seems that Cisco decided to cut the Web Authentication from IOS XE and all router platforms running it. I manage to search using "by feature" tool and unfortunately made sure that Web Authentication gone:https://cfnng.cisco.com/b...

leosoft · 06-21-2021

Can you give a config example of what you thought? Thanks

leosoft · 06-20-2021

Hello,I really have no idea if this is an explanation. Because web authentication is not a simple command that it does not giving any error message. There are dozens of separate commands and at least two well known ways to build it (legacy and c3pl...

Member Since	‎12-09-2017 12:44 PM
Date Last Visited	‎03-01-2024 12:02 AM
Posts	26
Total Helpful Votes Received	12

User Statistics

User Activity

C1111-8P VLAN dot1Q problem

C1111-8P and Web Authentication

IPv6 Prefix-Delegation with dual stateless ISPs

IPv6 Prefix-Delegation with dual stateless ISPs

Invalid credentials if multiple SIP accounts on 8821 phone

Re: Invalid credentials if multiple SIP accounts on 8821 phone

Re: Invalid credentials if multiple SIP accounts on 8821 phone

Re: C1111-8P and Web Authentication

Re: IPv6 Prefix-Delegation with dual stateless ISPs

Re: C1111-8P and Web Authentication