Does anybody have a clue why certmetric online tool is not showing a CCIE recertification progress? There is zero info, and it is only when trying to display my CCIE status. For CCNA/CCNP etc. everything works great - can see my CE credits, my exams....
I would like to know whether I can put 1Gbps transceiver into 10GE SFP+ port on an ISR4461 router. I cannot find the exact info inside the docs. The transceiver would probably have to be a GLC-LH-SM - maybe GLC-SX-MMD but this should not make a diffe...
I would like to know if someone can tell me how long would it usually take for a single flow to be switched over to another link in an etherchannel bundle, after the link the flow was riding on fails? In other words, what would the downtime be until ...
Hi,
I would like to confirm that the following setup would work. Two chassis, two same supervisors (720-10G). One link in the VSL bundle is on the supervisors. OK so far.
There are also two line cards in these two chassis'. But one is, say, 6708-10GE...
I have created a rather successful setup in terms of vmware integration and one tenant. From my point of view all important things are properly configured, but I still have some issues. I won't go into details unless it turns out absolutely necessary...
Not sure you guys got me straight. Let me try to be more specific with a table drawing...
Chassis-1VSL linkChassis-2SUP720-10G<----------------->SUP720-10G6708-10GE<----------------->6716-10GE or even 6800 series...
So, these two 10GE cards should b...
Thanks for the quick answer!
Would this inproper setup prevent vlans being created on the leaves? Because this is the most obvious problem I have. Other things seem fine. I see all VMs on my esx host, EPG is propagated over there as well, I have AEP ...
Great, thanks, I will check this out!
Can you tell me one thing here - how does the fabric know which port to use and which port has the correct vlans? How does the fabric map correct vmware infrastructure with the apropriate physical ports? I have ...
Not sure I want to investigate further! :)
So, you are saying that I would be better of to use just one physical port for L3out connection to the router, and the second physical port to connect my vmware infrastructure? This is how I understand your ...
