Hello, I'm trying to allow cacti to only graph a single port on our Cisco 6500 Sup 720 Router.Specifically port te4/1 which has index of 202.TenGigabitEthernet4/1: Ifindex = 202  I know command to allow it would be:snmp-server view test ifEntry.*.202...

Hello, I'm trying to allow cacti to only graph a single port on our Cisco 6500 Sup 720 Router.Specifically port te4/1 which has index of 202.TenGigabitEthernet4/1: Ifindex = 202  I know command to allow it would be:snmp-server view test ifEntry.*.202...

Hi,I just can't seem to understand this. I have 2x switches and 2x routers.R1, has vlan 10, 20, and 50 configured on it.R2, has vlan 30 only on itS1 is trunked to R1 and carries vlan 20 for switch management, and vlan 50 for serversR2 is trunked to R...

Installed 2 new 6704-10gb blades in 2x 6509 routers.Routers are already configured with 1x 10gb-LR crossconnect between each router with a simple /30 between them. Working fine.After the upgrade. Initially I want to setup a 30gb port channel between ...

Hi,I have a Cisco 2511-RJ with 16 async RJ-45 built in ports. I can't seem to get the thing to work.I want to connect the rj-45 ports to the console ports of Cisco 6500 sup2s and sup720 routers.A) what type of cable is needed? Roll over? or Straight ...