About wlcuser

wlcuser · 02-17-2020

I had running 40 Pieces of Aironet 2802I on a WLC 5520 with 8.5.160 temporary for an event.I had on one port of an 2960X with SW 15.2(7)E0a the following issue:%CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on GigabitEthernet1/0/8 (not half dupl...

wlcuser · 02-17-2020

Ok, i cannot do anymore right know, if ist will appears in the future i will try some elimination processes.

wlcuser · 02-17-2020

No i did´nt, but the switchport was running on 1000Full with no errors and i had no traffic impact. Only the error message was in the log. And with sh cdp neighbors detail i saw the same error. I cannot reproduce or test anymore, it was for an event ...

wlcuser · 02-17-2020

But 15.2.7E0a is the Cisco suggested version:https://software.cisco.com/download/home/284795740/type/280805680/release/15.2.7E0aWhich should i use instead?

wlcuser · 02-17-2020

Here´s the new thread:https://community.cisco.com/t5/wireless-and-mobility/aironet-2800-duplex-mismatch-on-wlc-5520-with-8-5-160-and-c2960x/m-p/4030817#M114544

wlcuser · 02-17-2020

That is not possible, the problem was temporary and has now gone and is not reproducible, i had running 40 2802I temporary for an event and the issue was only on one port of an 2960X.The AP´s were deployed to six 2960X but the issue was on only one p...

Member Since	‎03-03-2018 11:59 PM
Date Last Visited	‎03-16-2023 07:45 AM
Posts	9

User Statistics

User Activity

Aironet 2800 duplex mismatch on WLC 5520 with 8.5.160 and C2960X with 15.2(7)E0a

Re: Aironet 2800 duplex mismatch on WLC 5520 with 8.5.160 and C2960X with 15.2(7)E0a

Re: Aironet 2800 duplex mismatch on WLC 5520 with 8.5.160 and C2960X with 15.2(7)E0a

Re: Aironet 2800 duplex mismatch on WLC 5520 with 8.5.160 and C2960X with 15.2(7)E0a

Re: Aironet 2800 duplex mismatch

Re: Aironet 2800 duplex mismatch