We are experiencing an issue, where just one trunk port is getting dhcp and able to reach another network that isn't making much sense to us. For example:
Switchport:
switchport trunk encapsulation dot1q switchport trunk native vlan 54 switchpo...
Core connects to on-prem switch at other site over fiber
interface GigabitEthernet2/0/7 switchport mode trunk ip access-group EXAMPLE_in in auto qos trust dscp service-policy input AutoQos-4.0-Trust-Dscp-Input-Policy service-policy output AutoQos-4.0...
apologize i was actually incorrect. The port is a trunk port on the access switch:
interface FastEthernet1/0/48 description switch_uplink switchport trunk encapsulation dot1q switchport mode trunk
It is a stack of 2, i looked at the config of 2/...
Good question. They set it up this way for differentiating the data and voice vlans is my understanding. We are changing this over to access ports (ie in this case we made it an access port). This is just the way every port on the network is creat...
proper vlan 54 interface:
interface Vlan54 ip address 172.16.2.254 255.255.255.0 secondary ip address 172.17.6.253 255.255.255.0 ip helper-address 172.16.10.1
Physical connection to our switch (with the switchport in question):
switchport mode...
