About cmc

cmc · 03-04-2010

Our PIX 500 is currently configured to receive its IP address dynamically. We need to change this to a static, and login to the unit with no problem, find the area to choose which type of connection we have, and have no success establishing a statis...

cmc · 02-10-2010

I have an RV042 that we are able to access with XP using the QuickVPN client, but now we've added a laptop running 7 Premium 64-bit. I've downloaded the newest client (1.3.0.3), run it in Compatibility mode (Windows XP, tried both SP2 and SP3), te r...

cmc · 10-23-2009

We've inherited the above, and it functions well, except we now need to open a few ports for a new application.We type in its address (192.168.0.1), are asked for a id/pwd, a pop-up appears showing a grpahic that links to the Cisco site, some stats, ...

cmc · 03-05-2010

Collin,ISP indicates it may be at our end (of course), here's where I'm at...Cisco Pix Manager is 3.0(4)In Configuration, System Properties, Category Interface, I edit the IP from DHCP to Static, and type in IP and Subnet MaskIn Category DHCP Service...

cmc · 03-04-2010

Thanks, we'll coordinate with the ISP and see what happens. Dan

cmc · 10-28-2009

Brandon, We can telnet to it, are asked for a password, and are stopped at that point. I've got a feeling we may not be able to access this without doing a factory reset. I thought I read somewhere where we can submit the serial number and some add...

Member Since	‎10-23-2009 07:47 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	6

User Statistics

User Activity

PIX 500 static vs dynamic IP

RV042 and Windows 7 w/ QuickVPN cannot connect

No admin access to PIX 501 Firewall

Re: PIX 500 static vs dynamic IP

Re: PIX 500 static vs dynamic IP

Re: No admin access to PIX 501 Firewall