About no.blue.skin

no.blue.skin · 03-03-2010

We have some troubles with call through a SIP trunk.There is a SIP trunk beetween a CUCM and an external (public network) SIP endpoint.Phone calls can be established with success but the SIP calls are established between the phone device and the ext...

no.blue.skin · 09-03-2009

There is a button configuration in CUCM that corrispond to the "m" (monitor) or "o" (overlay) flags on line button under CCME?examples: ephone 1 ... button 1:1 2:5 3o20,21 4m2Many thanks.

no.blue.skin · 08-29-2009

We want to kwow if it is possible to display the calling name on IP Phones for external incoming calls.In other words, when a external call arrives, the CUCM will lookup on an directory service (internal or external) to find a name matching the calli...

no.blue.skin · 08-20-2009

We need to configure some DN on the CUCM to "call" a group of phones. These phones has to activate the speaker so the message can be heared from all interested user.To be more direct I will wrote an expample:- DN 801 will activate speakers on Phone1,...

no.blue.skin · 03-08-2010

Unfortunately,our budget do not let us to buy a CUBE device/license.Did you think we can do the same with the 2800 router used to connect the ISDN lines?Or something else.Any other idea is appreciated.Many ThanksA.

no.blue.skin · 03-07-2010

Hi Aaron,thanks for reply.I have already try to use the "require MTP" as option on the trunk configuration, but when checked the call cannot be established.Now you told me that the MTP supports only G711 codec so that is the problem: the SIP trunk is...

no.blue.skin · 09-03-2009

Hi Paolo,many thanks to the suggestion and to let me to download the TCL script.I have only to do some fewer personalization, and the tests was successfully.Do you think that the same behaviour can be replicated using a CUE module?I tryed to figure i...

no.blue.skin · 08-21-2009

Many thanks for suggestions.I look at InformaCast and Barbee (are the same thing due to barbee acquisitions).Your information clarify that here is not support for paging on a group of phones.But there is a chance for the loudspakers? At the moment th...

Member Since	‎04-20-2009 01:10 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	10

User Statistics

User Activity

force SIP calls through CUCM (SIP trunk)

CCME monitor and/or overlay behaviour on buttons in CUCM

name lookup for external incoming calls on CUCM

call to a group of ephones on CUCM 7.1

Re: force SIP calls through CUCM (SIP trunk)

Re: force SIP calls through CUCM (SIP trunk)

Re: name lookup for external incoming calls on CUCM

Re: call to a group of ephones on CUCM 7.1