About YECA911ORG

YECA911ORG · 03-11-2010

I have to implement a site-to-site tunnel over an existing WAN link. One of the routers currently NATs addresses from one LAN to the other (see diagram).Firewall 2 does not yet exist - I plan on deploying it to accomplish the tunnel from Firewall 1 ...

YECA911ORG · 02-25-2010

I have several 56K frame-relay circuits that use Cisco 805 routers. Our current config is that we connect an ADTRAN unit (external DSU) to the telco circuit, then the router to the ADTRAN. We use the ADTRAN because the 805 does not have internal CSU...

YECA911ORG · 02-05-2010

Hello. I have ASA 5505 boxes that I want to configure for site-to-site encryption over a WAN link. I need the enctyption to be FIPS 140-2 compliant. I am running Cisco ASA Version 7.2(3), installed about May 2008.My links go: LAN-ASA-Router-<WAN>-...

YECA911ORG · 03-11-2010

Thank you for the quick reply!-MB

YECA911ORG · 02-08-2010

Thank you for your help. I appreciate it!

YECA911ORG · 02-05-2010

Thank you!I have a follow-up question, that I should have made clear in my original question.Can I make one-to-many VPN connections with the ASA 5505 firewalls, as illustrated below:Site to site, from FW_1 to FW_A, and FW_1 to FW_B, and FW_1 to FW_C.

Member Since	‎02-04-2010 04:27 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	6

User Statistics

User Activity

NAT inside Site-to-Site VPN Tunnel

Replacement router for frame-relay circuit

FIPS Compliant site-to-site VPN

Re: NAT inside Site-to-Site VPN Tunnel

Re: FIPS Compliant site-to-site VPN

Re: FIPS Compliant site-to-site VPN