About energyservices

energyservices · 03-09-2010

Hi All, I'm trying to move from Local authentication to Radius authentication. I put a check mark on the "MSCHAPv2 Capable" but ASA uses PAP to request for authentication with the Radius server. Authentication is rejected because my IAS server requir...

energyservices · 02-23-2009

Hi All,Somehow my AnyConnect client has stoped working on Vista x64 Ultimate. It works fine on any other system (XP, Vista Home, Vist Business, etc.) I'm using version 2.3.0254I get this message when I try to connect.The VPN client was unable to succ...

energyservices · 01-30-2009

Hi all,I have a problem with inbound traffic. I have setup my firewall to allow traffic on http, imap4 and smtp ports. But I can't get through. Am I missing anything? Or did I do something wrong? My SSL VPN works no problem. Any help will be apprecia...

energyservices · 08-30-2008

I use AnyConnect to connect both XP and Vista clients to our company VPN. XP clients have no problem, but some Vista clients encountering issues. When they try to connect first time they get an error message "The VPN client driver has encountered an ...

energyservices · 10-10-2007

I am pretty desperate for ideas at this point; I've spent almost a week on this and the VPN is still down.The story unfolds: we just moved all network equipment from a shelving unit to a rack. Some cables may not have been plugged back into their ori...

energyservices · 03-12-2010

This is from help:To enable MS-CHAPv2 as the protocol used between the security appliance and the RADIUS server for a VPN connection, password management must be enabled in the tunnel group general attributes. Enabling password management generates a...

energyservices · 03-10-2010

I already updated to latest release and it didn't help. I have searched the Internet and found that it is possible to do that but no one can explain how. I'm more than sure that this unit can do it, but i don't know how.

energyservices · 01-30-2009

Thanks for help guys. My web server doesn't have a public IP. I'm using NAT. This is the reason I'm using interface Outside as it is a public IP address.I think what I'm missing is the statement when it says all http traffic should go to web server. ...

energyservices · 09-03-2008

I'm using version 2.2.0136 and i don't use CSD at all. I don't even have it installed. Do you think this is a Vista bug?

energyservices · 10-15-2007

Thank you very much Acomiskey, solved the problems I was having. I hope you have a great week. Thanks again.

Member Since	‎10-10-2007 02:11 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	13
Total Helpful Votes Received	20

User Statistics

User Activity

ASA 5510 - RADIUS authentication only using PAP!

AnyConnect on VIsta x64 Ultimate

Inbound traffice problem

AnyConnect fails to connect first time.

remote clients to 506e running PIX 6.3(5)

Re: ASA 5510 - RADIUS authentication only using PAP!

Re: ASA 5510 - RADIUS authentication only using PAP!

Re: Inbound traffice problem

Re: AnyConnect fails to connect first time.

Re: remote clients to 506e running PIX 6.3(5)