About ekkanoocisco

ekkanoocisco · 03-02-2010

Hi,I am trying to configure site to site VPN using ASA5520 in my Head office and cisco 887 ADSL router with atm interface in my branch office.I have configured the 887 router as shown in the configuration below.crypto isakmp policy 1 encr 3des authen...

ekkanoocisco · 03-03-2009

unable to telnet to 4948 switch from a routed network

ekkanoocisco · 03-15-2010

Hi,Now my VPN is working fine.BUt i am not able to telnet the router form my main office through VPN tunnel.

ekkanoocisco · 03-04-2010

I tried an extended ping from my 887 routerto my LAN ip in main officeThe below output i am getting :ADSL_RTR#show crypto isakmp saIPv4 Crypto ISAKMP SAdst src state conn-id status77.69.xxx.130 89.xxx.43.88 MM_NO...

ekkanoocisco · 03-02-2010

Hi,I am able to ping the public interface of my ASA 5520 WAN.Please find the attached configuration of my 887 Router (public ip address is fake).ADSL_RTR#show crypto isakmp saIPv4 Crypto ISAKMP SAdst src state conn-id...

ekkanoocisco · 03-04-2009

Hi Giuseppe,Thanks for your reply.I am able to ping the device and also telnet the device locally.There is no filter configured on the vty.The default gateway is also set.But i ma not able to access the swith either ping or telnet from a routed netwo...

Member Since	‎02-14-2009 10:32 PM
Date Last Visited	‎06-22-2022 12:08 AM
Posts	6

User Statistics

User Activity

Site to Site VPN using ASA5520 and cisco 887 ADSL router (atm interface).

4948 Switch

Re: Site to Site VPN using ASA5520 and cisco 887 ADSL router (at

Re: Site to Site VPN using ASA5520 and cisco 887 ADSL router (at

Re: Site to Site VPN using ASA5520 and cisco 887 ADSL router (at

Re: 4948 Switch