Hi allNot sure if this is the right place to put this post but I just wanted to know whether it's possible to monitor the usage of the switch fabrics on a Catalyst switch or not. I know that I can monitor and collect statistics for individual interfa...

Hi allI read this document on configuring MS L2TP VPN with ASA firewall http://www.cisco.com/en/US/docs/security/asa/asa72/asdm52/selected_procedures/asdml2tp.html using ASDM. At the half way mark, there're comments on how to configure Tunnel Group S...

Hi allI was wondering whether it's possible to define a same subnet that exist on both the inside and outside interfaces on a PIX 515 running ver 6.3(4). For instance a subnet of 10.10.1.0/24. I'm setting up the PIX to receive RIP routing update from...

Hi allAttached is a pdf diagram showing I've stacked together 4 x Catalyst 3750 switches. It's working fine at the moment but if the power to one rail is lost, the complete stack is broken. Hence I thought of moving the power connection in the 'New S...

Hi allI'm in the process of finding out more detailed technical information on how video conferencing is implemented by OCS 2K8. Things such as typical bandwidth usage, protocol, accepted level of delays etc. What's more important are sample configur...