About f.mbomda

f.mbomda · 02-25-2021

Hi to all I have an SX20 Cisco TelepresenceSoftware version is: TC7.3.15.a9f4c3a I have this issue: WARNING: Default Call ProtocolThe default call protocol is set to H323, but system is not registered on that protocol. The system may not be able to m...

f.mbomda · 02-26-2021

Hi Bro I want to use in standalone mode with another sx10

f.mbomda · 02-11-2019

PleaseJust make sure that your ACL permit the RP announce and discovery address ( 224.0.1.39 - 224.0.1.40 )

f.mbomda · 11-20-2018

to avoid this message you can create an ipsec profile and add "tunnel protection ipsec profile profile_name" under the tunnel interface

Re: the advantage of user static · 11-02-2018

It permit you also a quick deployment and no need to use a IGP between PE and CE When you injecting route from the Radius it also easy to maintain and permit to have a very small CE routing table

Member Since	‎04-26-2018 06:22 AM
Date Last Visited	‎04-24-2024 06:31 AM
Posts	5

User Statistics

User Activity

SX20 Dignostics failed on H323

Re: SX20 Dignostics failed on H323

Re: %PIM-6-INVALID_RP_JOIN: Received

Re: Problem with GRE over IPsec with IOS Version 15.1(2)T4

Re: the advantage of user static