About shankrappa

shankrappa · 09-12-2019

We have cisco UCSC-C220-M4S server running ESXi 5.5U3,now we are going to upgrade Firmware 4.0(2h) , followed by ESXi 6.5 U2 upgrade using below cisco customized image VMware_ESXi_6.5.0_10719125_Custom_Cisco_6.5.2.3_Bundle.zipRelease Date: 2019-05-0...

shankrappa · 03-12-2019

Hi, We have cisco c240m4s server running with 4.0(1c) FW and it’s installed with esxi 6.5 where in I mounted FW ISO image of 4.0(2c)and tried to boot from ISO to upgrade FW,but server is nor booting from ISO image ,it’s giving an error that Loading i...

shankrappa · 02-25-2019

We recently upgraded esxi 5.5 U3 to esx 6.5 U2 with cisco customized image on C240-M4S Server. We first upgrade cisco firmware from 2.0(6) to 4.0(1c) and then esxi host upgrade from 5.5 u3 to 6.5 U2.(Please find the attached text to know Driver and ...

shankrappa · 12-07-2018

We have new Cisco Rack Server with below configuration ,configured RAID 1 for OS drive and RAID 6 for Data DriveCisco UCS 240 M5LFirmware Version : 4.0(1c)Cisco 12 G modular Raid Controller . Below are BIOS configured Options such as P-SATA Option RO...

shankrappa · 11-13-2017

Hi I have cisco new c-series server (M220 M4S) and while upgrading firmware from 3.0(3a) to 3.0(3c),I m getting below error message “dropping to debug shell sh can't access tty”.So please can some help what would be cause and to fix the issue.After m...

shankrappa · 10-29-2019

Finally issue fixed by disabling LSI Drivers and enabling MegaRaid drivers on ESXi host

shankrappa · 10-29-2019

Finally issue fixed by disabling LSI Drivers and enabling MegaRaid drivers on ESXi host

shankrappa · 03-23-2019

We have been still working with Vendor Cisco and Vmware, still no resolution /cause of the issue . However we did some below changes to fix the issue as Local disk drive causing the issue to hosts to be non-responsive state as per Vmware Analysis.,A...

shankrappa · 03-14-2019

Thanks Kirk ,by using different browser ,now we are able to load ISO from server. Seems either browser or java version issue

shankrappa · 02-26-2019

We founded bug in Cisco (https://quickview.cloudapps.cisco.com/quickview/bug/CSCuw38385) which indicates that if is happening large number of times this might cause unresponsive hosts with the following conditions, But Cisco said that the given bug ...

Member Since	‎03-23-2015 08:56 PM
Date Last Visited	‎11-05-2019 11:23 PM
Posts	27
Total Helpful Votes Received	6

User Statistics

User Activity

UCSC-C220-M4S NIc Driver for ESXi 6.5 U2

c240m4s server is not loading/booting from ISO image

hosts are not responding state/frozen state after upgrade from 5.5U3 to 6.5U2 on C240-M4S

No disk drive was detected during Ubuntu OS install on new UCS 240 M5Lserver

“dropping to debug shell sh can't access tty”. while upgrading firmware for M220 M4S

Re: hosts are not responding state/frozen state after upgrade from 5.5U3 to 6.5U2 on C240-M4S

Re: hosts are not responding state/frozen state after upgrade from 5.5U3 to 6.5U2 on C240-M4S

Re: hosts are not responding state/frozen state after upgrade from 5.5U3 to 6.5U2 on C240-M4S

Re: c240m4s server is not loading/booting from ISO image

Re: hosts are not responding state/frozen state after upgrade from 5.5U3 to 6.5U2 on C240-M4S