So I have a 2900 router that I have configured the GI0/0 port with 10.1.209.266/24 and can ping the outgoing interface from the router however I'm trying to set up the GI0/1 port with an IP but keep getting an IP overlap when trying to put in a IP on...
I have a 9000 switch and when I try to add one user name, it will take it, adding a second or third and it fails with aaa error user5 5, after adding the aaa new-model statement, it will do the same, one name, this is from the CLI
So just to follow-up and correct myself as well, I changed the GI0/0 port to a 10.1.209.226 using 10.1.209.240/28 reset the outside interface to 10.1.209.225 and changed the subnet on the GI0/1 port with a valid IP and subnet, and it all works now. T...
I set the GI0/0 port up for 10.1.209.0/28 and set the router GI0/0 port with .266 and I can ping out to the next interface, reset the GI0/1 port and reconfig'd it with a different ip/sub and can now ping from my laptop all the way. thanks
so I changed the interface on the GI0/0 port to a /28 subnet, and can get to the outside, but still having an issue with the GI0/1 port where I'm not hitting the GI0/0 port
Trying to config the GI0/1 port with a viable IP to ping out to the interface. I placed a no ip on the GI0/1 and tried with a sub interface, installed a switch and I can hit the sub interface but still can hit the gi0/0 port, so somewhere my subnet c...
