About Vincent Breton

Vincent Breton · 09-18-2012

Hi!I activated AutoQoS on a Catalyst 2960S (IOS 15.0.2.SE).When AutoQos is enabled... a 12 GB file between a Server and a PC run at 100-150 Kbytes/sec.If I deactivate the AutoQoS on the switch it run at 10 000 KBytes/sec.Someone has an idea on what c...

Vincent Breton · 09-03-2019

Yes,To make the "IP-Helper" command work properly through this kind of switch, we discover that you need to enable DHCP service with the "service dhcp" command in CLI.We experimented other problems too with this switch... So, running 16.9.3 is a good...

Vincent Breton · 03-29-2019

Look like i have the same issue with a 9500-12qCan't get any ip address from dhcp for any client behind 9500

Vincent Breton · 09-19-2012

I changed the 10 Mbs value in the Default Class Policy.I tried to change the value in the other class too but I know that my traffic normally pass through the Default Class.The PC-to-PC copy had the same source and destination switch than my FTP tran...

Vincent Breton · 09-18-2012

I tried to change the bandwidth on each class.No results.The problem is just with FTP protocol.I tried to use other FTP applications (like Filezilla, WS-FTP) to transfer files. All gave the same results. If I copy the same file from a PC to another, ...

Member Since	‎02-04-2011 07:06 AM
Date Last Visited	‎04-05-2024 12:24 AM
Posts	5

User Statistics

User Activity

AutoQoS cause slow performance on Catalyst 2960S with FTP Transfert

Re: Cisco Catalyst 9500-24Q ip helper-address problem

Re: Cisco Catalyst 9500-24Q ip helper-address problem

AutoQoS cause slow performance on Catalyst 2960S with FTP Transf

AutoQoS cause slow performance on Catalyst 2960S with FTP Transf