Used CCA 3.2.1 multisite Mgr - Each site has a unique Vlan subnet, can ping WAN IP on both sites...but can't ping the data vlan on either site. Therfore, can't make intersite calls. what should I be looking for ? not sure if all o...
How do you enable a SPA500 series phone to accept more than 1 call on a shared extension? I read somewhere you can use ephone-dn,overlay - is this possible with the UC320W?
Is it possible to configure a UC320w to use one phone number when using both a PSTN and a SIP trunk?? trying to cut down on confusion when clients see different callback numbers...etc
Thanks for the quick response. If I configure a 2nd shared extension, how are the two joined to create 4 calls. Ex: have an extension called Sales - how do I get 4 calls handled by this extension?
We are currently using the UC320w (topology = Voice only) sitting behind a Microsoft TMG security server - it is working without any problems at all. The Wan port on the uc320w is connected to a second nic on the security server (using a different su...
