About Jet Ming Darrell Tan

Jet Ming Darrell Tan · 05-10-2012

Any one has tried to configure the WRP400 to using its FXS ports as SIP phone, with Microsoft Lync 2010 server?Been trying to configure the WRP400 Line 1, got only failed registration, unable to get registered to the lync server thru sip (both under ...

Jet Ming Darrell Tan · 05-22-2012

Hi nseto,Thanks for the assistance earlier. Just to update you.The earlier 0.0.0.0 IP was without an external WAN connection. if you connected without NAT Mapping in the Voice Admin, you wil get the External WAN IP address. If you connected to your W...

Jet Ming Darrell Tan · 05-21-2012

Hi nseto,I have new logs after some more configuration. ( Attached below )Before connecting WAN:++++Extract of Log +++on May 21 12:42:36 2012 [0]->192.168.18.20:5060(553)Mon May 21 12:42:36 2012 [0]->192.168.18.20:5060(553)Mon May 21 12:42:36 2012 RE...

Jet Ming Darrell Tan · 05-18-2012

Hi nseto,I was unable to locate where to change that 0.0.0.0 ip address, is there a configuration tool?I dont understand how to you the WRP400 SPC tool, is there a documentation which teaches me to use it?RegardsDarrell TamSent from Cisco Technical S...

Jet Ming Darrell Tan · 05-17-2012

Hi nseto,Sorry, where would that be the setup?ThanksDarrell TanSent from Cisco Technical Support iPad App

Jet Ming Darrell Tan · 05-17-2012

Hi nseto,In fact all devices are static ip. Sorry but I am not exactly as technically savvy, is that extraction for 0.0.0.0 ip address coming from the lync server or the WRP? If it's from the WRP, where do i set that device IP? I thought the wireless...

Member Since	‎05-02-2012 04:05 AM
Date Last Visited	‎02-22-2021 12:55 AM
Posts	8

User Statistics

User Activity

WRP400:VOICE:SIP:LYNC2010

Re: WRP400:VOICE:SIP:LYNC2010

Re: WRP400:VOICE:SIP:LYNC2010

Re: WRP400:VOICE:SIP:LYNC2010

Re: WRP400:VOICE:SIP:LYNC2010

Re: WRP400:VOICE:SIP:LYNC2010