About lc19582

lc19582 · 01-30-2020

First post here on the community. I am install my first HX cluster with a Cisco Intersight and on the validation I am getting Summary - Summary Step: IP address: 169.254.1.20 at default port: 443 is reachable and Cluster Data IP Not Used: IP address:...

lc19582 · 03-24-2020

this is a response I got back from Cisco that fixed the problem. I did not fix it, but someone on my network team and Firewall team fixed the issue. We’ve seen before where this is caused by one of the following:Proxy ARP enabled on the router.169.25...

lc19582 · 02-06-2020

This is a fresh install. I am able to deploy with the Hyperflex installer with no issues. I wiped the systems with the Cisco HX ESXi image and redeployed with intersight and I get the error.

lc19582 · 02-05-2020

I was also able to get the system deployed with the Hyperflex installer so I know there are not any issues.I received the error message and reinstalled with Cisco ESXi. I then installed with the Hyperlex installer and was able to get deployed. I then...

Member Since	‎05-03-2018 12:01 PM
Date Last Visited	‎05-07-2020 12:56 PM
Posts	4

User Statistics

User Activity

Intersight HX Install - Summary Step: IP address: 169.254.1.20 at default port: 443 is reachable.

Re: Intersight HX Install - Summary Step: IP address: 169.254.1.20 at default port: 443 is reachable.

Re: Intersight HX Install - Summary Step: IP address: 169.254.1.20 at default port: 443 is reachable.

Re: Intersight HX Install - Summary Step: IP address: 169.254.1.20 at default port: 443 is reachable.