carloskuontay

carloskuontay · 04-09-2010

Hi Experts! Please help me with the some doubts about connectivity time. 2 months ago I did some pin...

carloskuontay · 11-20-2009

Hi Giuseppe! Thanks for your answer. Just one questions...Do you know the right name for this featur...

carloskuontay · 11-20-2009

Hi Guys!!! I need your help please. I have a Router 12404/PRP (IP=1.1.1.1) and I'm trying to connect...

carloskuontay · 09-02-2009

HSRP behaviourHi experts! I have an HSRP configuration between PC-Linux and 2 routers, and this is t...

carloskuontay · 12-03-2008

Thanks John! "Power enable" does work with optical and electrical modules. The redundancy really wor...

carloskuontay · 12-03-2008

Hi Jeremy.If you want to upgrade the IOS you have to check this link, but be careful of the director...

carloskuontay · 12-03-2008

Hi Jeremy, in my case I have the IOS in the sup-bootflash. The primary card is in slot 5, and second...

carloskuontay · 12-03-2008

Hi experts! I have a Switch Cisco WS-C6509-NEB-A and I need to do some test to proof redundancy betw...

carloskuontay · 11-25-2008

Thanks Istvan! Do you have an example of the configuration of policy-map?

carloskuontay · 11-25-2008

Hi Experts! I am trying to configure bandwidth control (only ICMP) in a ROUTER but in "both" ways. F...

carloskuontay · 11-25-2008

Hi Experts! I am trying to configure bandwidth control (only ICMP) in a ROUTER but in "both" ways. F...

carloskuontay · 11-25-2008

Hi Mark, i already solved the problem, but I have to do some changes regarding to the document that ...

carloskuontay · 11-24-2008

Hi Mark, I tried to follow the process but when i reset the Slot-6 (standby supervisor), it goes to ...

carloskuontay · 11-24-2008

Thank you very much Jon. Thank you very much Mark. 2 questions:1.- What is the recommended version? ...

carloskuontay · 11-24-2008

Thank you very much Mark. 2 questions more:1.- What is the recommended version? 12.2(33)SXH3 or 12.2...

Does a new Supervisor improve round-trip time?