About alanoarraes

alanoarraes · 04-11-2010

Dear All:I am new with this equipments and I do not have idea how to start to solve this problem.My Cisco IP Phone 7942 does not start after factory reset.It stopped in a Cisco splash screen with a circle with a dot inside.Please, I would be grateful...

alanoarraes · 04-11-2010

Hi Aaron:I setup my router to foward the port 69 to my tftp server but it is not working yet.The scheme that I am using is :Modem ADSL ---> Router RV042 ---> Switch POE ---> Cisco IP Phone 7942. Do you have some sugestion?Thks, Alano

alanoarraes · 04-11-2010

Hi Aaron:I setup the TFTP server in the server of Elastix and dowload a SIP Image in the root.One question: my phone is connect to a router (Cisco RV042) that is serving DHCP? Is it possible tell in the router that my TFTP Server is on my Elastix Ser...

alanoarraes · 04-11-2010

Hi Aaron:this equipment is conect to a Switch POE and the Switch to the internet through a router.The router is the DHCP and it give an ip to the IP Phone.I did not setup a DHCP server or TFTP server.Could you explain how can I do it?I apologize for ...

alanoarraes · 04-11-2010

Hi Aaron,I apologize because I did not understand very well your last questionThe call processing system that I would like to use is Elastix(Asterisk).Thks,Alano

alanoarraes · 04-11-2010

Hi Aaron:I perfomed the following steps:1) unplug the cable(poe) and turn off the equipment;2) plug the cable in the POE Switch and press "#" and release;3) while the line lights blinking I entry with the sequence "123456789*0#"After the steps above ...

Member Since	‎04-11-2010 08:49 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	7

User Statistics

User Activity

IP Phone 7942G does not start after factory reset

Re: IP Phone 7942G does not start after factory reset

Re: IP Phone 7942G does not start after factory reset

Re: IP Phone 7942G does not start after factory reset

Re: IP Phone 7942G does not start after factory reset

Re: IP Phone 7942G does not start after factory reset