Actually, It can removed but after reboot the switch(Stacking) it come back.
Command is
class-map match-any non-client-nrt-class
!
policy-map port_child_policy
class non-client-nrt-class
bandwidth remaining ratio 10
!
It didn't show in startup-...
I have a job to upgrade ASA to customer. (From 8.6 > 9.6..)
I saw in ASA version 9.0.2(and earlier) in section of DNS Inspection command they didn't have "tcp-inspection".
policy-map type inspect dns preset_dns_map parameters message-length m...
Hello,
Did someone know if we lunch command "ip igmp snooping querier" in 'Global configuration mode', What would happen?
Refer to this section 'Enabling the IGMP Snooping Querier', sup2T configuration guide
http://www.cisco.com/c/en/us/td/docs/swit...
Hi,
How to show memory(RAM) utilize on SCE8000 ?
I'd try to search about 'show sce8000 memory command reference', but I can find nothing about command to show it.
All I found is about, CPU Utilization / memory configuration / show applications slot ...
Hi,I want to know limitation of DHCP on Catalyst 3850 switch.- Can I made multiple pool, which total of about 12k+ users?
- How many real limitation?
My device are 2 of WS-C3850-32XS-S, stacking. Use as core switch.I had find this in a lot of datashe...
@Georg Pauwen wrote:
Hello,
how are you removing the configuration ?
Try to clear the class from the policy map first, then the policy map, then the class map. >> Yes. Already done it.
Do you have the policy map applied to an interface ? >> No....
So. For my understanding now.
It should be/can configure, whether it use TCP or not ?After apply "tcp-inspection" for this network (that already use TCP for DNS and work well), after I had upgrade, It will not impact the DNS traffic ?
Am I right in u...
Thank you for your very clear explanation Karsten.
Can I ask you more for my more clear ?
If they didn't use TCP for DNS(Actually, I'm not sure), but I have put configure "tcp-inspection", It will impact to the DNS traffic or network security ?If...
