Hello Guys,Good Day !!This is unbelievable and very surprisingly that Cisco stopped it own propriety Protocol EIGRP for the transport side for IOS-XE cEdge devices at version 17.9.4a and put under limitations and restrictions. Now, due to this i am ...
Hello Guys,Good Day !!c-Edge devices not sending UDP packets for Control Connections while communicating SD-WAN control controllers: vSmart and vManage.The control communication happen on UDP ports with vBond but after some random time the connectio...
Hello Guys,Good Day !!Need your help and guidance on cli commands to configure the NAT for the Internet Link on cisco cEdge for the direct L3 TLOC extension (Private IP address) between the 2 cEdges.In vEdge we can simply config NAT enable under the ...
Hello Guys,Good Day !!This is very strange that : on version 20.9.4 the login banner is coming after the login prompt but it is perfectly coming on version 19.2.31 i.e. before login prompt.Would you please help me to fix : i am on version 20.9.4Early...
Hello Team,Please help me to understand: in hybrid scenario of Controller deployment, if vBond resides behind the NAT, and lets say cEdge on-boarding is done with the Internet as TLOC then as we know, vBond should learn both the Private and NATed pub...
HI Lei,Thanks for your reply !!Yes, the control connections on transport side comes UP via static routing and the BFD sessions also comes UP between the branch sites but the main thing I believe that we need to take care and put static routing where ...
HI Kanan,Thanks for your reply: its was supported in Gibraltar version 16.12x as we have build lab on it is working the problem is production version 17.x Cupertino in which it is not supported. Regards,Sushil Kumar
Hello Guys,Thanks for your response, the issue found was different and ICMP packets used at back-end by UDP so this is ideal behavior from c-Edge and the issue is fixed.Thanks,
