turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About dhikra
Online
dhikra
Member since
05-10-2018
Beginner
02-14-2019
06:45 AM
I ask if a controler 3504 with ios 8.5.131 work with acces point 1815i with version
beacuse i see in controler
etah_CCO/label/mallorca]5), [wireless-lnx2:/san/BUILD/workspace/83MR4_Repost_Che--More-- Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2015 by Cisco Systems, Inc. Compiled Mon Jun 4 22:56:21 PDT 2018
ROM: Bootstrap program is U-Boot boot loader
////////////////////////////////
(Cisco Controller) >show ap join stats summary all
Number of APs.............................................. 1
Base Mac AP EthernetMac AP Name IP Address Status a0:93:51:3f:b0:a0 N A AP11 10.1.1.11 Not Joined
BOOTLDR: U-Boot boot loader Version 37
AP11 uptime is 0 days, 0 hours, 11 minutes Last reload time : Wed Feb 13 14:05:32 UTC 2019 Last reload reason : unknown
cisco AIR-AP1815I-I-K9 ARMv7 Processor rev 5 (v7l) with 1015920/847052K bytes of memory. Processor board ID FGL2221B241 AP Running Image : 8.3.143.0 Primary Boot Image : 8.3.143.0 Backup Boot Image : 8.3.111.0 1 Gigabit Ethernet interfaces 2 802.11 Radios Radio FW version : 9cef56836c2be4ced5dacbd94f6c28c0 NSS FW version : not available
--More-- [*02/14/2019 07:45:09.0000]
//////////////////////////////////////////////
(Cisco Controller) >show tech-support
---------------Show boot---------------
Primary Boot Image............................... 8.5.131.0 (active) Backup Boot Image................................ 8.5.131.0
---------------show time---------------
Time............................................. Thu Feb 14 07:43:00 2019
Timezone delta................................... 0:0 Timezone location................................
---------------Show Inventory---------------
System Inventory Burned-in MAC Address............................ DC:F7:19:D3:C0:80 Maximum number of APs supported.................. 150
---------------Show udi---------------
NAME: "Chassis" , DESCR: "Cisco 3500 Series Wireless LAN Controller" PID: AIR-CT3504-K9, VID: V02, SN: FCW2231M08U
---------------Show sysinfo---------------
System Information Manufacturer's Name.............................. Cisco Systems Inc. Product Name..................................... Cisco Controller Product Version.................................. 8.5.131.0 RTOS Version..................................... 8.5.131.0 Bootloader Version............................... 8.5.103.0 Emergency Image Version.......................... 8.5.103.0
OUI File Last Update Time........................ N/A Build Type....................................... DATA + WPS
System Name...................................... Cisco_d3:c0:82 System Location.................................. System Contact................................... System ObjectID.................................. 1.3.6.1.4.1.9.1.2427 Redundancy Mode.................................. Disabled IP Address....................................... 10.1.1.10 IPv6 Address..................................... :: Last Reset....................................... Cold reset due to PLL_DC_OK
--More-- or (q)uit
... View more
02-13-2019
01:15 AM
(Cisco Controller) >show time
Time............................................. Wed Feb 13 10:08:15 2019
Timezone delta................................... 0:0 Timezone location................................ (GMT) London, Lisbon, Dublin, Edinburgh
NTP Servers NTP Polling Interval......................... 3600
Index NTP Key Index NTP Server Status NTP Msg Auth Status ------- ---------------------------------------------------------------------------------------------- 1 0 1.1.1.1 In Progress AUTH DISABLED
is correcte time
... View more
02-13-2019
01:04 AM
i can give e debug fromCONTROLLER so i need what is the problem and what can be a solution that allo AP joind to controller !
(Cisco Controller) >debug capwap errors enable
(Cisco Controller) >*spamApTask4: Feb 13 09:58:31.210: 00:fc:ba:67:49:c0 Unable to get Ap mode in Join request
*spamApTask4: Feb 13 09:58:31.211: 00:fc:ba:67:49:c0 Failed to allocate database entry for AP 1.1.1.25:5264
*spamApTask4: Feb 13 09:58:31.211: 00:fc:ba:67:49:c0 Failed to add database entry for 1.1.1.25:5264
*spamApTask4: Feb 13 09:58:31.211: 00:fc:ba:67:49:c0 State machine handler: Failed to process msg type = 3 state = 0 from 1.1.1.25:5264
*spamApTask4: Feb 13 09:58:31.211: 00:fc:ba:67:49:c0 Failed to parse CAPWAP packet from 1.1.1.25:5264
*spamApTask4: Feb 13 09:58:35.905: 00:fc:ba:67:49:c0 Unable to get Ap mode in Join request
*spamApTask4: Feb 13 09:58:35.906: 00:fc:ba:67:49:c0 Failed to allocate database entry for AP 1.1.1.25:5264
*spamApTask4: Feb 13 09:58:35.906: 00:fc:ba:67:49:c0 Failed to add database entry for 1.1.1.25:5264
*spamApTask4: Feb 13 09:58:35.906: 00:fc:ba:67:49:c0 State machine handler: Failed to process msg type = 3 state = 0 from 1.1.1.25:5264
*spamApTask4: Feb 13 09:58:35.906: 00:fc:ba:67:49:c0 Failed to parse CAPWAP packet from 1.1.1.25:5264 Cisco Controller) >debug capwap errors enable
(Cisco Controller) >*spamApTask4: Feb 13 09:59:27.988: 00:fc:ba:67:49:c0 DTLS connection was closed *spamApTask4: Feb 13 09:59:32.768: 00:fc:ba:67:49:c0 ApModel: AIR-AP1815I-I-K9
*spamApTask4: Feb 13 09:59:42.489: 00:fc:ba:67:49:c0 Unable to get Ap mode in Join request
*spamApTask4: Feb 13 09:59:42.490: 00:fc:ba:67:49:c0 Failed to allocate database entry for AP 1.1.1.25:5264
*spamApTask4: Feb 13 09:59:42.490: 00:fc:ba:67:49:c0 Failed to add database entry for 1.1.1.25:5264
*spamApTask4: Feb 13 09:59:42.490: 00:fc:ba:67:49:c0 State machine handler: Failed to process msg type = 3 state = 0 from 1.1.1.25:5264
*spamApTask4: Feb 13 09:59:42.491: 00:fc:ba:67:49:c0 Failed to parse CAPWAP packet from 1.1.1.25:5264
*spamApTask4: Feb 13 09:59:47.184: 00:fc:ba:67:49:c0 Unable to get Ap mode in Join request
*spamApTask4: Feb 13 09:59:47.184: 00:fc:ba:67:49:c0 Failed to allocate database entry for AP 1.1.1.25:5264
*spamApTask4: Feb 13 09:59:47.184: 00:fc:ba:67:49:c0 Failed to add database entry for 1.1.1.25:5264
*spamApTask4: Feb 13 09:59:47.184: 00:fc:ba:67:49:c0 State machine handler: Failed to process msg type = 3 state = 0 from 1.1.1.25:5264
*spamApTask4: Feb 13 09:59:47.184: 00:fc:ba:67:49:c0 Failed to parse CAPWAP packet from 1.1.1.25:5264
/////////////////////////////////////////////////////////////////////
(Cisco Controller) >debug capwap events enable
(Cisco Controller) >*spamApTask4: Feb 13 10:00:39.262: 00:fc:ba:67:49:c0 DTLS connection was closed *spamApTask4: Feb 13 10:00:39.262: 00:fc:ba:67:49:c0 DTLS connection closed event receivedserver (1.1.1.111/5246) client (1.1.1.25/5264) *spamApTask4: Feb 13 10:00:39.262: 00:fc:ba:67:49:c0 No entry exists for AP (1.1.1.25/5264) *spamApTask4: Feb 13 10:00:39.262: 28:ac:9e:89:48:e0 Deleting AP entry 1.1.1.25:5264 from temporary database. *spamApTask4: Feb 13 10:00:44.053: 00:fc:ba:67:49:c0 Discovery Request from 1.1.1.25:5264
*spamApTask4: Feb 13 10:00:44.053: 00:fc:ba:67:49:c0 ApModel: AIR-AP1815I-I-K9
*spamApTask4: Feb 13 10:00:44.053: 00:fc:ba:67:49:c0 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 200, MaxLicense=200 joined Aps =0 *spamApTask4: Feb 13 10:00:44.053: 00:fc:ba:67:49:c0 apType = 66 apModel: AIR-AP1815I-I-K9
*spamApTask4: Feb 13 10:00:44.053: 00:fc:ba:67:49:c0 apType: Ox42 bundleApImageVer: 8.3.143.0 *spamApTask4: Feb 13 10:00:44.053: 00:fc:ba:67:49:c0 version:8 release:3 maint:143 build:0 *spamApTask4: Feb 13 10:00:44.053: 00:fc:ba:67:49:c0 Discovery Response sent to 1.1.1.25 port 5264
*spamApTask4: Feb 13 10:00:44.053: 00:fc:ba:67:49:c0 Discovery Response sent to 1.1.1.25:5264
*spamApTask4: Feb 13 10:00:53.519: 28:ac:9e:89:48:e0 DTLS connection not found, creating new connection for 1.1.1.25 (5264) 1.1.1.111 (5246)
*spamApTask4: Feb 13 10:00:53.765: 28:ac:9e:89:48:e0 DTLS Session established server (1.1.1.111:5246), client (1.1.1.25:5264) *spamApTask4: Feb 13 10:00:53.765: 28:ac:9e:89:48:e0 Starting wait join timer for AP: 1.1.1.25:5264
*spamApTask4: Feb 13 10:00:53.771: 00:fc:ba:67:49:c0 Join Request from 1.1.1.25:5264
*spamApTask4: Feb 13 10:00:53.771: 00:fc:ba:67:49:c0 Unable to get Ap mode in Join request
*spamApTask4: Feb 13 10:00:53.771: 00:fc:ba:67:49:c0 Allocate database entry for AP 1.1.1.25:5264, already allocated index 65535
*spamApTask4: Feb 13 10:00:53.771: 00:fc:ba:67:49:c0 AP Allocate request at index ffff *spamApTask4: Feb 13 10:00:53.772: 00:fc:ba:67:49:c0 Failed to allocate database entry for AP 1.1.1.25:5264
*spamApTask4: Feb 13 10:00:53.772: 00:fc:ba:67:49:c0 Failed to add database entry for 1.1.1.25:5264
*spamApTask4: Feb 13 10:00:53.772: 00:fc:ba:67:49:c0 Join Request failed!
*spamApTask4: Feb 13 10:00:53.772: 00:fc:ba:67:49:c0 State machine handler: Failed to process msg type = 3 state = 0 from 1.1.1.25:5264
*spamApTask4: Feb 13 10:00:53.772: 00:fc:ba:67:49:c0 Failed to parse CAPWAP packet from 1.1.1.25:5264
*spamApTask4: Feb 13 10:00:58.462: 00:fc:ba:67:49:c0 Join Request from 1.1.1.25:5264
*spamApTask4: Feb 13 10:00:58.462: 00:fc:ba:67:49:c0 Unable to get Ap mode in Join request
*spamApTask4: Feb 13 10:00:58.462: 00:fc:ba:67:49:c0 Allocate database entry for AP 1.1.1.25:5264, already allocated index 65535
*spamApTask4: Feb 13 10:00:58.462: 00:fc:ba:67:49:c0 AP Allocate request at index ffff *spamApTask4: Feb 13 10:00:58.462: 00:fc:ba:67:49:c0 Failed to allocate database entry for AP 1.1.1.25:5264
*spamApTask4: Feb 13 10:00:58.462: 00:fc:ba:67:49:c0 Failed to add database entry for 1.1.1.25:5264
*spamApTask4: Feb 13 10:00:58.462: 00:fc:ba:67:49:c0 Join Request failed!
*spamApTask4: Feb 13 10:00:58.462: 00:fc:ba:67:49:c0 State machine handler: Failed to process msg type = 3 state = 0 from 1.1.1.25:5264
... View more
02-13-2019
12:45 AM
cisco AIR-AP1815I-I-K9 ARMv7 Processor rev 5 (v7l) with 1015956/820560K bytes of memory. Processor board ID FGL2209B3S7 AP Running Image : 8.3.111.0 Primary Boot Image : 8.3.111.0 Backup Boot Image : 0.0.0.0 1 Gigabit Ethernet interfaces 2 802.11 Radios Radio FW version : 8edf74e05d634a962e683454e8fc1be2 NSS FW version : not available
Base ethernet MAC Address : 28:AC:9E:89:48:E0 Part Number : 0-0000-00 PCA Assembly Number : 074-105850-02 PCA Revision Number : 0 PCB Serial Number : FOC22080U65 Top Assembly Part Number : 074-105850-02 Top Assembly Serial Number : FGL2209B3S7 Top Revision Number : A0 Product/Model Number : AIR-AP1815I-I-K9
... View more
02-13-2019
12:08 AM
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc. Product Name..................................... Cisco Controller Product Version.................................. 8.3.143.0 RTOS Version..................................... 8.3.143.0 Bootloader Version............................... 8.3.15.96 Emergency Image Version.......................... 8.3.143.0
OUI File Update Time............................. Sun Sep 07 10:44:07 IST 2014
Build Type....................................... DATA + WPS
System Name...................................... controlleur System Location.................................. System Contact................................... System ObjectID.................................. 1.3.6.1.4.1.9.1.1631 IP Address....................................... 1.1.1.111 IPv6 Address..................................... :: System Up Time................................... 0 days 0 hrs 4 mins 14 secs System Timezone Location......................... System Stats Realtime Interval................... 5 System Stats Normal Interval..................... 180
--More-- or (q)uit
Configured Country............................... TN - Tunisia
State of 802.11b Network......................... Enabled State of 802.11a Network......................... Enabled Number of WLANs.................................. 1 Number of Active Clients......................... 0
OUI Classification Failure Count................. 0
Burned-in MAC Address............................ 00:0C:29:C8:E9:71 Maximum number of APs supported.................. 200 System Nas-Id.................................... WLC MIC Certificate Types........................ SHA1 Licensing Type................................... RTU vWLC config...................................... Small
(Cisco Controller) > /////////////////////////////////////////////////////////////////// Cisco Controller) >show time
Time............................................. Wed Feb 13 06:48:04 2019
Timezone delta................................... 0:0 Timezone location................................
NTP Servers NTP Polling Interval......................... 3600
Index NTP Key Index NTP Server Status NTP Msg Auth Status ------- ---------------------------------------------------------------------------------------------- 1 0 1.1.1.1 In Progress AUTH DISABLED
/////////////////////////////////////////////////////////////////////// Cisco Controller) >show license all
Feature name: ap_count License type: Evaluation License Eula: Not Accepted Evaluation total period: 12 weeks 6 days Evaluation period left: 89 days License state: Active, Not-In-Use License Nodelocked: Yes RTU License Count: 200
================================== Total available count : 200 Total inuse count : 0 ////////////////////////////////////////////////// Cisco Controller) >show ap join stats summary all
Number of APs.............................................. 1
Base Mac AP EthernetMac AP Name IP Address Status 00:fc:ba:67:49:c0 N A AP28AC.9E89.48E0 1.1.1.25 Not Joined
//////////////////////////////////////////////////////////// (Cisco Controller) >show interface summary
Number of Interfaces.......................... 4
Interface Name Port Vlan Id IP Address Type Ap Mgr Guest -------------------------------- ---- -------- --------------- ------- ------ ----- management 1 untagged 1.1.1.111 Static Yes N/A service-port N/A N/A 192.168.100.2 Static No N/A virtual N/A N/A 10.12.12.1 Static No N/A wifi-data - untagged 0.0.0.0 Dynamic No N/A
/////////////////////////////////////////////////////////////////////////////////
wa have only vlan : 1.1.1.0 /24 and we have a router i ask you what DHCP is configured :: i configured DHCP internal or DHCP external !!! 2) what configured in acces point or controler that allow AP joiund to controler!!!
and version 8.3.143 don't used interface web option " internal DHCP server"
... View more
02-12-2019
10:47 AM
what command can be configure in controller or in acces point !!
what can be give ti help me !
thanks in advance
... View more
02-12-2019
06:41 AM
Hello
I have controleur virtual with 8.3.143 and i have a acces point 1815i with 8.3.111
So i need what configuration in controller or in access point that allow access point joind to controlleur because is not joined
.what ares comand can be used in acces point or in controller !!
thanks in advanced
... View more
Created by
dhikra
in Wireless and Mobility
in Wireless and Mobility
02-12-2019
02:54 AM
02-12-2019
02:54 AM
Just i give you other information about controller and AP is as a controlleur 1815i
Cisco Controller) > (Cisco Controller) >show tech-support
---------------Show boot---------------
Primary Boot Image............................... 8.8.100.0 (default) (active) Backup Boot Image................................ 8.8.111.0
//////////////////////////////////////////////////////////////////////
AP as a Moblity express==========>
cisco AIR-AP1815I-I-K9 ARMv7 Processor rev 5 (v7l) with 1016100/429856K bytes of memory. Processor board ID FGL2221B268 AP Running Image : 8.8.100.0 Primary Boot Image : 8.8.100.0 Backup Boot Image : 8.8.111.0 Primary Boot Image Hash: 667206093befba1a8a421436cc32e2097e0fb95f0a02ca18c06c762f2b85abab7fcd1a7161346951bcf1179903654d005aaf1a719bb21940bf70abf31e88228e
I put AP CAPWAP with 8.8.111 but it reload and Back to 8.8.100 !!because controlleur is boot with 8.8.100
SO what i can do the next !!
thanks
... View more
Created by
dhikra
in Wireless and Mobility
in Wireless and Mobility
02-12-2019
02:21 AM
02-12-2019
02:21 AM
I put
config boot path 1
reload :===> same primary version
and also i try
config boot path 2
reload :===> same primary version
so please what command that force the AP to boot with 8.8.111 !!
thanks in advance
... View more
Created by
dhikra
in Wireless and Mobility
in Wireless and Mobility
02-12-2019
01:42 AM
02-12-2019
01:42 AM
cisco AIR-AP1815I-I-K9 ARMv7 Processor rev 5 (v7l) with 1016100/788364K bytes of memory. Processor board ID FGL2209B3S9 AP Running Image : 8.8.100.0 Primary Boot Image : 8.8.100.0 Backup Boot Image : 8.8.111.0 Primary Boot Image Hash: 5d18bf2dd83eb927f5db60ef46005440dd0a1c410284f278775b5e34a17cb0156d02e7976865236e7cb8ac69c2729979c1aa78d0cb2832298ce41c691ed9ce62 Backup Boot Image Hash: b74c97255daf86219bbab6c75d82d9de9b0f5bc4604b407288c5702261bd86597c9417cb6f67ebe5ba092274a814d5ef80504da416d1764168c7f162e9067a0d 1 Gigabit Ethernet interfaces 2 802.11 Radios Radio FW version : ce271f0c3bd6087f274af2d1d72e15b7 NSS FW version : not available
Base ethernet MAC Address : 28:AC:9E:89:3D:B8 Part Number : 0-0000-00 PCA Assembly Number : 074-105850-02 PCA Revision Number : 0 PCB Serial Number : FOC22063AD0 Top Assembly Part Number : 074-105850-02 Top Assembly Serial Number : FGL2209B3S9 Top Revision Number : A0 Product/Model Number : AIR-AP1815I-I-K9 /////////////////////////////////////////////////////////////////////
AP2#show capwap client config AdminState : ADMIN_ENABLED(1) Name : AP2 Location : default location Primary controller name : AP-TEST Primary controller IP : 1.1.1.73 Secondary controller name : Secondary controller IP : Tertiary controller name : Tertiary controller IP : ssh status : Disabled ApMode : Local ApSubMode : None Link-Encryption : Disabled OfficeExtend AP : Disabled Discovery Timer : 10 Heartbeat Timer : 30 Syslog server : 255.255.255.255 Syslog level : errors AP join priority : 1 IP Prefer-mode : Unconfigured CAPWAP UDP-Lite : Unconfigured AP retransmit count : 5 AP retransmit timer : 3 AP lsc enable : 0 AP Policy Tag : UNKNOWN AP RF Tag : UNKNOWN AP Site Tag : UNKNOWN AP Tag Source : 0 AP lsc reboot cnt : 0 AP lsc max num of retry : 0 SwVer : 8.8.100.0 spamStatTimer : 30 Led State Enabled : 1 Primed Interval : 0 AP ILP Pre-Standard Switch Support : Disabled IPv4 TCP MSS Adjust : Disabled IPv6 TCP MSS Adjust : Disabled LinkFailure : 0 SpamReboots : 101 ApCrashes : 0 AP VLAN Tag status : Disabled 0 AP Power Injector : Disabled Slot 0 Config: Radio Type : RADIO_TYPE_80211bg Radio Mode : Local Country code : Country ISO Code : CleanAir Enable State : Disabled Channel : 1 Automatic Config : 1 Channel Width : 20 Current Transmit Power : 1 Automatic Config : 1 DiversitySelection : Diversity Enabled HT Rx Antenna Selection : 3 HT Tx Antenna Selection : 3 Antenna Band Mode : Antenna Sector B Antenna Selection : Internal Antenna Antenna Selection : Internal Antenna Antenna Selection : Internal Antenna Antenna Selection : Internal Antenna Load Profile RF Busy Threshold : 10 Clients Threshold : 12 Bytes/Second Threshold : 1000000 --More-- [*02/12/2019 10:26:27.4099] Image d ///////////////////////////////////////////////////////////////////////////////////////////////////////////
FOR Moblity express i changed Egypt. Cisco Controller) >show ap summary
Number of APs.................................... 2
Global AP User Name.............................. AP-TEST Global AP Dot1x User Name........................ Not Configured Global AP Dot1x EAP Method....................... EAP-FAST
* prefix indicates Cisco Internal AP
AP Name Slots AP Model Ethernet MAC Location Country IP Address Clients DSE Location ------------------------------ ----- -------------------- ----------------- -------------------- ---------- --------------- ------- -------------- *AP780C.F0DB.2A90 2 AIR-AP1815I-I-K9 78:0c:f0:db:2a:90 default location EG 1.1.1.134 0 [0 ,0 ,0 ] AP2 2 AIR-AP1815I-I-K 28:ac:9e:89:3d:b8 default location 1.1.1.168 0 [0 ,0 ,0 ]
//////////////////////////////////////////////////////////////
I wait several hours but others acces point don't recieve the country code and also in interface web same output as CLI .
1) i put this command in controller for other acces point to be same code country as ME !!!
So why i still in boucle problem . Please , i would the team of this group give me solution about others acces point code country !
thanks
... View more
Created by
dhikra
in Wireless and Mobility
in Wireless and Mobility
02-12-2019
12:44 AM
02-12-2019
12:44 AM
i put ISARIL but ALSO AP 2 1815 don't accpeted any code country becuse the command
(Cisco Controller) >config ap disable
Incorrect input! Use 'config ap [enable/disable] <Cisco AP>'
(Cisco Controller) >config ap disable AP28AC.9E89.3E10
Cisco AP name is invalid.
/////////////////////////////////////////////////
Global AP User Name.............................. AP-TEST Global AP Dot1x User Name........................ Not Configured Global AP Dot1x EAP Method....................... EAP-FAST
* prefix indicates Cisco Internal AP
AP Name Slots AP Model Ethernet MAC Location Country IP Addr ess Clients DSE Location ------------------------------ ----- -------------------- ----------------- -------------------- ---------- ------- -------- ------- -------------- *AP780C.F0DB.2A90 2 AIR-AP1815I-I-K9 78:0c:f0:db:2a:90 default location IL 1.1.1 .134 0 [0 ,0 ,0 ] AP28AC.9E89.3E10 2 AIR-AP1815I-I-K 28:ac:9e:89:3e:10 default location 1.1.1. 47 0 [0 ,0 ,0 ]
i put the same name of acces point but tell me invalid !!!
So please help me that allow ALL AP joind to ME 1815 !
... View more
Created by
dhikra
in Wireless and Mobility
in Wireless and Mobility
02-11-2019
11:39 PM
02-11-2019
11:39 PM
(Cisco Controller) >show ap summary
Number of APs.................................... 2
Global AP User Name.............................. AP-TEST Global AP Dot1x User Name........................ Not Configured Global AP Dot1x EAP Method....................... EAP-FAST
* prefix indicates Cisco Internal AP
AP Name Slots AP Model Ethernet MAC Location Country IP Address Cl ients DSE Location ------------------------------ ----- -------------------- ----------------- -------------------- ---------- --------------- -- ----- -------------- *AP780C.F0DB.2A90 2 AIR-AP1815I-I-K9 78:0c:f0:db:2a:90 default location IL 1.1.1.134 1 [0 ,0 ,0 ] AP2 2 AIR-AP1815I-I-K 28:ac:9e:89:3d:b8 default location 1.1.1.168 0 [0 ,0 ,0 ]
(Cisco Controller) >config ap disable AP2
Invalid parameter specified.
(Cisco Controller) >config ap country IL ?
<Cisco AP> Enter the name of the Cisco AP. all Configure all the Cisco APs.
(Cisco Controller) >config ap country IL all
To change country code: first disable target AP(s) (or disable all networks). Changing the country may reset any customized channel assignments. Changing the country may reboot disabled target AP(s).
Are you sure you want to continue? (y/n) y
!!Warning!! Cannot change Country code on Universal APs. AP Name Country Status ------------------ ------ ------- AP780C.F0DB.2A90 IL enabled (Disable AP before configuring country)
(Cisco Controller) >config ap disable ?
<Cisco AP> Enter the name of the Cisco AP.
(Cisco Controller) >config ap disable ?
<Cisco AP> Enter the name of the Cisco AP.
(Cisco Controller) >config ap disable AP2
Invalid parameter specified.
(Cisco Controller) >
what is a solution can AP accpet country !!????,,
... View more
Created by
dhikra
in Wireless and Mobility
in Wireless and Mobility
02-11-2019
08:46 PM
02-11-2019
08:46 PM
Plese you can read my messages properly about outbout of this command and configuration and say me what solution that i can to take ??
Thanks
... View more
Created by
dhikra
in Wireless and Mobility
in Wireless and Mobility
02-11-2019
08:15 PM
02-11-2019
08:15 PM
If you have a solution then thanks to help me else , do not spend the time to answer me anything and heading to other discus!!!
please so can you help me !!!Thanks
... View more
Created by
dhikra
in Wireless and Mobility
in Wireless and Mobility
02-11-2019
10:06 AM
02-11-2019
10:06 AM
Please , i wait a solution for this problem
config ap {{ enable | disable } cisco_ap ( Tell me Name of the Cisco lightweight access point. in nvalid ) !!!?,AP28AC.9E89.48E0 in invalid !!!!!
thanks
... View more
Public Statistics
| Date Registered | 05-10-2018 07:33 AM |
| Date Last Visited | 02-15-2019 09:30 AM |
| Total Messages Posted | 150 |
.jpg "VIP Advisor"){kind=icon}
