About Giuseppe9

Giuseppe9 · 06-05-2018

Hello, I'm trying to configure the ACL on ASA 5505. I added some Permit Rule on outside interface (what I'm using for the test) but when I use the Packet Tracer on ASDM it say Dropped at "Global (implic rule)" It does: - ROUTE-LOOKUP: Ok - ACCESS-LIS...

Giuseppe9 · 05-22-2018

Hello, I'm having trouble with a simple network on my ASA 5505 I have 2 VLANs: inside, outside vlan1 has network 192.168.1.0 255.255.255.0 vlan2 has network 192.168.2.0 255.255.255.0 Gateway IP: 192.168.2.200 Interfaces are connected like: Router -...

Giuseppe9 · 06-09-2018

Ok, solved using the network object, creating a network object per rules and create a NAT rule from there. Thanks anyway for your time.

Giuseppe9 · 06-09-2018

Ok, I realized that the problem was the NAT. Now it works so I stepped to the next point, the port forwarding. I set "permit" all tcp traffic in outside_in and outside_out, Packet Tracer show the simulation as successful, and according to syslog th...

Giuseppe9 · 06-09-2018

Here the running config: interface Vlan1 nameif inside security-level 100 ip address 192.168.4.201 255.255.255.0 ! interface Vlan2 nameif outside security-level 100 ip address 192.168.3.202 255.255.255.0 ! interface Ethernet0/0 switchport ac...

Giuseppe9 · 05-22-2018

Yes, I tried both

Member Since	‎05-10-2018 11:33 AM
Date Last Visited	‎06-15-2018 12:10 AM
Posts	6

User Statistics

User Activity

ASA ACL drop all

Problem with a simple route

Re: ASA ACL drop all

Re: ASA ACL drop all

Re: ASA ACL drop all

Re: Problem with a simple route