My application group want to want to access application hosted in same subnet via it's NATted IP address.
Firewall have only two zone outside and inside.
Both source and destination IP located in same subnet and application group access this application which is hosted in 10.10.10.2 from source host 10.10.10.1 through using url (external DNS map with 184.108.40.206 and natted with 10.10.10.2).
This communication is not working in below configuration.
subnet 10.10.10.0 255.255.255.0
object network source
nat (inside,outside) static 220.127.116.11
nat (inside,outside) after-auto source dynamic obj-10.10.10.0 interface
access-list acl_inside extended permit tcp any4 any4 eq 80
access-list acl_inside extended permit tcp any4 any4 eq 443
access-list acl_outside extended permit tcp any4 10.10.10.2 eq 80
access-list acl_outside extended permit tcp any4 10.10.10.2 eq 443
route outside 0.0.0.0 0.0.0.0 18.104.22.168
can we configure like this to resolve this issue:
object network source-in
nat (inside,inside) static 22.214.171.124
... View more