I am not sure if its a limitation issue or maybe its something that not suppose to be in a network,The network works great,in the beginning I only configured the connection between R6 and R8 as NAT OUTand the PC connect to SW7 would get an IP address...

I am almost done, I configured SSH and console to all of the Switchs/Router,After advertising the network of the Switchs all of the Routing table in R6 switched from O (OSPF) to B (BGP)it appears that the problem is with the routing table of R6,ill b...

I made this topology,The network of R8 can ping to the outside routers,but it Cannot get a IP address via DHCP serveror get out to the other devices via SSH,file and picture is attached -user name Project-Password is 1234 

I got the the NAT part,I configured PAT on both sides of R6 and R8when I NAT one part so the network under R8 (192.168.1.0) is able to connect to everybody and get a dhcp adresswhen I put a nat on both sides it doesn't work,I have never done that kin...