About sunnystyle

sunnystyle · 09-30-2018

Hello, GuysCurrently, I am facing the issue in IPv4 route with an IPv6 next hop in IPv6 BGP. Topo & Versions:LO:10.99.99.99 <---> FlexVPN HUB (CSR1000v w/fixed IPv6 addr.) <---(IPv6 peering)---> FlexVPN Spoke(ISR4321 w/dynamic IPv6 addr.)--->LO:10....

sunnystyle · 03-19-2009

We are looking for Cisco IPICS system E&M interface to Radio Cable.For Kenwood Radios For Motorola Radios Is there have such for sales. we hope we can buy and used in our Cisco IPICS case. My radio is Kenwood TK3230. Thanks for help.

sunnystyle · 10-03-2018

@Harold Ritter wrote: RFC5549 is not currently supported in IOS. Without RFC5549 support, the next hop needs to be the same as the configured address family. In your case you need to support both ipv4 and ipv6 through FlexVPN. Regards, Hello, Har...

sunnystyle · 01-14-2018

Please try to enable LLDP on Cisco Switch side. Because of GS105PE using LLDP to exchange port power inline capacity. I have 3560CX , after enabled LLDP on Cisco switch side, the GS105PE can be running under POE+. Good Luck to you.

sunnystyle · 12-19-2017

Hi, I downgraded to X8.9.2 and test again, it did not solved. I need sometime to research on it. Recent days, I am trying to upgrade to X8.10.3, the newest version and try. Sunny

sunnystyle · 12-06-2017

CUCM/CUPIMP 10.5.2 EXP-C/EXP-E X8.10 I am facing the same issue too. Based on my analyze, the Expressway has big change on X8.10.x, It's "MRA Access Control with Authentication path". By default, When you select MRA, it will enable "UCM/LDAP basi...

sunnystyle · 08-19-2009

Hi:shawilsonI'm get the cable from networksradio.com. it works on our Motorola and Kenwood radio.Thanks.

Member Since	‎02-07-2006 09:32 AM
Date Last Visited	‎11-18-2018 07:42 PM
Posts	7
Total Helpful Votes Received	5

User Statistics

User Activity

Advertising IPv4 Routes Over IPv6 IBGP/EBGP Peering (aka. RFC5549)

Cisco IPICS E&M to Radio Cable

Re: Advertising IPv4 Routes Over IPv6 IBGP/EBGP Peering (aka. RFC5549)

Re: PoE+ with GS105PE (Bug CSCuv26385) on SG series

Re: Unable to login through MRA expressway

Re: Unable to login through MRA expressway

Re: Cisco IPICS E&M to Radio Cable