About janisw

janisw · 09-07-2018

Hi there I'm trying to implement wired 802.1x network security. I'v successfully configured my switch to support and forward the 802.1x auth request to my Microsoft Radius NPS Server. With a Notebook client I can connect to a port on the switch and...

janisw · 05-14-2018

Hi I would like to achieve that a wired client can authenticate via dot1x and received the defined vlan id from the radius server. The wifi configuration is already working. Client logs in with AD credentials and gets matched with the defined vlan....

janisw · 09-07-2018

I see options, but I cannot move the post...

janisw · 09-07-2018

Sorry, my mistake. Can I move the post?

janisw · 08-20-2018

Do you have set your ip helper address on your VLAN interface? Do you get an ip if you configure an interface without dot1x?

janisw · 05-22-2018

Found the solution! I had to change the Vlan ID on my radius server. I had the vlan name set, and not the ID. Our WLC could handle both (Name and ID). My radius standard attributes now look like this: Service-Type: FramedTunnel-Medium-Type: 802 (...

janisw · 05-15-2018

Thanks for your answer! switch#sh run aaa ! aaa authentication login default local group RADIUS-Servers aaa authentication enable default enable none aaa authentication dot1x default group RADIUS-Servers aaa authorization network default group RADI...

Member Since	‎05-14-2018 06:09 AM
Date Last Visited	‎09-14-2018 07:26 AM
Posts	7

User Statistics

User Activity

802.1x AP Supplicant with Microsoft NPS Radius

Wired dot1x with Microsoft NPS as radius Server

Re: 802.1x AP Supplicant with Microsoft NPS Radius

Re: 802.1x AP Supplicant with Microsoft NPS Radius

Re: Wired dot1x with Microsoft NPS as radius Server - Solved!

Re: Wired dot1x with Microsoft NPS as radius Server - Solved!

Re: Wired dot1x with Microsoft NPS as radius Server