About samador382

samador382 · 12-29-2015

Hi there, I have little experience with Cisco equipment. As of right now I am trying to connect (trunk I believe) two switches together. The main switch is a 3560 and the other is a catalyst 2950. Someone setup a VLAN on port 48 of the 3560. I want ...

samador382 · 01-04-2016

@Jasmus I could not run the mls qos command. It is not recognized on this switch. Perhaps because it is so old???

samador382 · 12-30-2015

Here is a little more info to better understand my environment. That MAINSWITCH has a few VLANS on it already. The VLAN 30 was setup by a company that hosts some of our servers. The VLAN 30 is what I want to use as a test environment. All other VL...

samador382 · 12-30-2015

I ran this command and the laptop connected to directly to port 48 on the MAINSWITCH still does not have internet access. Do I need to put a default ip on the VLAN? Thank you for taking the time, -SA

samador382 · 12-30-2015

@casanavep I plugged a laptop into port 48 on my main switch and it is not getting network access. When I tried to configure the VLAN or at least look into it i got the following error MAINSWITCH#conf t Enter configuration commands, one per line....

samador382 · 12-29-2015

main switch 3560 show vtp stat VTP Version : 2 Configuration Revision : 15 Maximum VLANs supported locally : 1005 Number of existing VLANs : 15 VTP Operating Mode : Client VTP Domain Name ...

Member Since	‎12-29-2015 06:48 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	25

User Statistics

User Activity

VLAN is being blocked

@Jasmus

Here is a little more info to

I ran this command and the

@casanavep

main switch 3560