First time poster here and I am stumped! I have two Catalyst 4006 switches that are on different floors of the same building. I want to replace one of the switches with a smaller switch, a WS-C2960g-8tcl. They are connected via fiber. I was able ...
Eureka, I figured it out! The router module on the 4006 that is being replaced was handling the routing for VLAN 24. When I looked at the gig interface that I was plugged into I noticed that VLAN 24 was not defined as a sub interface. I assigned t...
DHCP is not on the same subnet. The old 4006 that I am replacing was on Vlan 24 and it was working then. I also tried manually assigning an IP that is in the VLAN 24 range but to no avail. Here are the results from the 2960:sw7.1#sh int trunkPor...