Hi All,Do you know on how to configure FAC at CME ?I want to put PIN code when access to particular destination numberThx,Suryanto

Hi ALL,Can I do a failover with OSPF at the CE with 2 provider.For example when the link with ISP 1 at the HQ is dead, the INTERNAL LAN at CE can use the link from ISP 2 to reach the site of the ISP 1 by transiting the DRC sites.In this case, the DRC...

Hi Guys,Do you all know what is the primary cause when I see the Intermittent between O and O IA in CE routing Table.2 Sites using OSPF Area 0.This is the topology ;Topologi = CE HQ = <-> = PE HQ = <-> Cloud Telkom <-> = PE DRC = <-> = CE DRC =Thx,Su...

Hi All,Any idea about this issue below.VG can talk with PABX via E1 Interface*Nov 4 08:05:19: ISDN Se0/1/0:15 Q931: Applying typeplan for sw-type 0x12 is 0x0 0x0, Calling num 9923*Nov 4 08:05:19: ISDN Se0/1/0:15 Q931: Applying typeplan for sw-type ...

Dear All,I tried to put the image to Phone. However it is still failed eventhough I have create the list.img with image and put the file to TFTP:/ at the UC6.0I have refer the step details from the cisco documentation. However it is still failed. Do ...