SPA8800 does not pass the call from PSTN port(line 1) to VOIP port(phone 1).If caller called on PSTN line its keep ringing, not forwarded to VOIP port(phone 1).For eg; SPA3102 pass the PSTN call to VOIP port(Phone 1).NO settings found in SPA 8800: P...
i just bought spa8800 series gateway 4fxs with 4 fxo port. And found there is no option to set NAT mapping enable "No" however does allow to set for Phone 1 but for other lines its "Yes" by default and does not allow to set.We did try to disable by p...
we just bought spa8800 series gateway 4fxs with 4 fxo port. And found there is no option to set NAT mapping enable "No" however does allow to set for Phone 1 but for other lines its "Yes" by default and does not allow to set.We did try to disable by ...
Hi,the sip server does not recieve the packets due to STUN. BTW why are you using STUN: " dont want to get voice relay from the server" if yes, try this:Disable NAT Mapping , enable Keep alive and check the RTP packets 99.9% voice will connect direct...
Hi,Thank you for your reply.Would it be posisble to explain what's the logic behind to designed this way ? where 1 port has option and other dont.You may give me technical logic as i am CCIE, CCVP.waiting for your response.regards
