police rate 400000 exceed-action drop Hi there,I have been trying to configure shaping with minimal success on a router with a ADSL/dialer interface. I am trying to reserve a certain amount of bandwidth for certain traffic types (defined by ...
Thanks again Olivier!I've not used native ATM-layer shaping before - maybe I'm misreading this, but won't this affect all traffic passing through the interface? My goal here is to stop general traffic bursting up to the maximum.Have I misunderstood?...
Hi Olivier,Thanks again for the quick response!I initially applied the policy under the PVC as you suggested - config as below:policy-map QOS-DEFAULT class CLASS-HIGH priority 150 class class-default shape average 100000!interface ATM0/0/0 load...
Hi again,So I've re-applied the shaping policy and added the load interval as suggested. I've pasted below the relevant section (as well as including the details of the high priority ACL for reference) below:class-map match-any CLASS-HIGH match acce...
Hi both,Thanks for your responses. I've now switched back to policing and didn't gather the atm stats before. I will kick it off again shortly and respond here.In regard to Olivier's statement regarding 'traffic to the dialer before the shaping'; t...