About northtexasnetworks

northtexasnetworks · 02-12-2019

Hello, We have an ASA5506X running 9.6.1. We are currently running a VPN tunnel using: Ikev1 with AES-256, SHA1, and DH 2, and it runs very well. We are considering changing the config to use: ikev2 with AES-256, SHA256, and DH20. Can anyone tell m...

northtexasnetworks · 06-02-2017

Hello, We have an ASA5506 running 9.6(1). I have it configured for Remote VPN users to connect via AnyConnect. I also have it configured to do a site-to-site VPN with a supplier. Our inside LAN is 192.168.1.0/24 The supplier tells us they want all...

northtexasnetworks · 05-24-2017

Hello, I have the following config on my old ASA5510 running 7.2. This is part of a site-to-site VPN config. nat (inside) 0 access-list no_nat access-list no_nat line 1 extended permit ip 192.168.22.0 255.255.255.0 host 10.125.125.15 access-list no...

northtexasnetworks · 09-17-2014

Hello,I have installed SAP2602I access points at my customers location and configured a corporate network and a guest network. Everything works fine except when a user is connected to the guest network, they cannot access a web server that is hosted...

northtexasnetworks · 07-03-2014

Hello,I have a have a Windows server providing DHCP to all users on VLAN 1. I want the 3925 router to provide DHCP to users on a specific VLAN, in this case VLAN 55, that will be a wireless guest VLAN. The WAP is a SAP2602 so no controller. I have...

northtexasnetworks · 02-13-2019

Hi Matty, thanks for this, it is an excellent document, however it does not specifically address DH20, which is what our partner wants to deploy, however everything I’ve read considers DH20 to be safe, just hoping the CPU on a ASA5506X can handle it.

northtexasnetworks · 02-12-2019

We only have 2 active VPN tunnels running. Someone told me DH20 is very CPU intensive may cause a slow down on the lower end ASA like the 5506. Thanks for your help.

northtexasnetworks · 02-12-2019

Hello, We have an ASA5506X running 9.6.1. We are currently running a VPN tunnel using: Ikev1 with AES-256, SHA1, and DH 2, and it runs very well. We are considering changing the config, at the request of the company at the other end of the VPN tunnel...

northtexasnetworks · 06-02-2017

Hi JP, Thank you for your quick response and your excellent advise. All of my previous experience has been with version 7 of the ASA software and these new NAT statements are a bit of a learning curve. I used the commands you suggested and when I en...

northtexasnetworks · 09-18-2014

Hi Steve,Thanks for your reply. I am sure the problem is a hair pinning issue as the firewall config does not allow connections to the outside address from internal clients.Can you give me a sample config to make this work? Is it just a firewall mo...

Member Since	‎05-20-2009 07:26 PM
Date Last Visited	‎09-06-2023 12:27 AM
Posts	36
Total Helpful Votes Received	5

User Statistics

User Activity

ASA5506X Performance Capabilities

nating inside traffic to a static IP for site-to-site tunnel

nat 0 on 5506 ASA with 9.1

Wireless Guest network config question

DHCP server on 3925 router with multiple VLANs

Re: Diffie Hellman Groups

Re: ASA5506X Performance Capabilities

Re: Diffie Hellman Groups

Hi JP,

Hi Steve,Thanks for your