Basic UCS B Series cabling overview. The different cable/connector types are described and shown. for more information and other UCS related documentation please seehttp://www.cisco.com/go/ucs
Ryan,The most common method to do this is to match the request based on the HTTP Host header. The host header is where we will find the domain name in the request. To do this you will need a different L5 content rule for each expected domain name, ...
Ryan,You are nearly there. Just configure the services you reference as type of "redirect" and give the parameters you need. For example:service redirector_server1_8080 type redirect no prepend-http domain "https://domain.name.com" keepalive ty...
Vinh,I would suggest to first try to connect the KVM dongle directly to the front of the blade(s). Sometimes that helps during the initial stages of configuration.If that does not help, you can also try to remove and re-insert the CMOS battery for t...
Yes, you can have leave the zone as the default method (round robin) and configure the balance method of weighted round robin in the record. Any balance configured in the record will supercede the zone balance method. The record configuration would...
