HiI upgraded two C24M4 servers from 3rd release to 4th and now I can't open KVM console on both servers due to error: 'Client has been disconnected as a result of the network connection has been dropped'. It's opened in new HTTPS window and I can't l...
HiWe plan to upgrade our current C240 with some new drives, but almost all drives from the server specification is EOL (https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/c240m4-lff-spec-sheet.pd...
Hello,
Is there any way to check Rx\Tx power , voltage counters and so on on IOMs?
I can check the info on the FI ports, but not on the chassi's IOM:
(nxos)# show interface transceiver details Ethernet1/1 transceiver is present type is 10Gbase...
I found that KVM is working if the source IP address is from the same network. So seems that the system just don't have the correct gateway address. Is it possible to check and correct it? The CIMC has gateway in its configuration, while KVM seems no...
Hi Kirk, Thanks for the reply. Can you please clarify few things?Our server is LFF and the drive is LFF, so I guess it should be ok regarding the size and sleds.Second thing - do the C-series have capability catalog? If yes, I don't understand, how c...
Can you share the screen of port group configuration?
Do use teaming for that ports on ESXi?
Also can you share with us the NICs configuration screen in UCSM?
