About Julian.Milano

Julian.Milano · 09-17-2017

I have a server called TEL1 which is running the following:UCS B200 M4E5-2690 v3 CPUUCS Manager on firmware 2.2(3f)Server firmware:-- Adapter 1 = Cisco VIC1240 V4.0(1f)-- BIOS B200M4.2.2.3d.0.111420141438-- Board Controller 5.0-- CIMC Controller 2.2(...

Julian.Milano · 03-22-2017

I have a UCS B200 M3 and B200 M4 server which I need to disable 1 of the 2 processors for licensing purposes. From what I can see, this is only achievable by physically removing the 2nd processor and removing the RAM allocated to that processor. Is t...

Julian.Milano · 03-16-2017

I have a Windows7 workstation with multiple versions of Dot.Net as shown here:v2.0.50727 V=2.0.50727.5420v3.0 V=3.0.30729.5420Windows Communication Foundation,3.0.4506.5420Windows Presentation Foundation,3.0.6920.5011v3.5 ...

Julian.Milano · 03-07-2017

I have 2 MDS 9148 switches which we use as zoning switches. We have the following (simplified) setup: EMC_VNX5400_SAN_1, zoned to VMware host VMHOST01 & VMHOST02 in vCentreFarm01- in VSAN10EMC_VNX5400_SAN_2, zoned to VMware host VMHOST03 & VMHOST04 ...

Julian.Milano · 09-27-2016

I have two MDS9148 switches for redundancy and have a number of CISCO UCS Blade servers zoned to various EMC VNX SANs and it has all been working OK and still is. We recently installed 3x Dell730 servers and a NetApp NAS and created the zoning on bo...

Julian.Milano · 09-25-2017

Thanks Wes, the part I don't get is how you found this: @Wes Austin wrote:... then you are using the 2.2.8g release bundle based on this document: Release Bundle Contents for Cisco UCS Manager, Release 2.2ucs-b200-m3-k9-cimc.3.1.21e.binIs there a loo...

Julian.Milano · 09-18-2017

I checked the document and I'm unable to decipher if my B200 M3 server running 3.1(21e) (CICM controller) is compatible with my UCS Manager running 2.2(3f)? I would guess that the architecture version has to be at or above the firmware version of ANY...

Julian.Milano · 03-22-2017

Thanks Wes, I thought as much. I have reduced cores for SQL licensing and for Oracle licensing we need to remove a processor but as you said, it looks like the only way is to remove the 2nd CPU and remove the allocated RAM to that CPU and try to relo...

Julian.Milano · 03-07-2017

I assume IVR relates to trunking of switches but in this case both switches are separate fabric domains, but redundant to each other so that if one goes down the other will continue to provide fabric connectivity to all devices. We don't have IVR any...

Julian.Milano · 10-03-2016

I don't know what just happened, but the WWNs are appearing now on the NetApp now!! The only thing I can think of is that Walters commands have triggered something, I don't know what! Thank you all so much for your help. If you can help me to find ...

Member Since	‎03-31-2015 08:33 PM
Date Last Visited	‎06-12-2018 05:59 PM
Posts	25
Total Helpful Votes Received	10

User Statistics

User Activity

How to check the firmware & drivers compatibility matrix?

Disable one processor of a UCS B200 Blade

Cannot install Cisco UCS PowerTools on Win7 workstation

Zoning MDS switch- zoning across VSANs

MDS9148 switch will not zone servers and NAS

Re: How to check the firmware & drivers compatibility matrix?

Re: How to check the firmware & drivers compatibility matrix?

Thanks Wes, I thought as much

I assume IVR relates to

I don't know what just