HELLO ALLi have a packet loss issue in ISP domain from only one side in all PE routers which is CISCO NCS5K to ASR920 routers the issue only when pinging in NCS5K Type escape sequence to abort.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!...
Hi I'm trying to access ASDM from internal interface in order to configure site to site vpn to build my configuration prior to shipping and before client's network become usable the problem is I cannot access ASDM https://10.10.10.1 is not working...
Hi Everyone
Sorry if I'm posting in wrong topic
I have issue regarding to windows virtual server please find attached pictures for clarifying
I made rules in FortiGate to allow server access to internet (80,8080)
and when I access to server ther...
Hi all
we have problem regarding to traffic via mpls between 2 locations
in main office we have
core c3850 stack 192.168.1.1
access c3650 stack connected to servers, printers
vlan 120 for servers , vlan 130 voice
and the branch location
cisco...
Hi Guys
I have a question regarding to cisco stack switches
in our company they asked me to replace D-Link DGS-1210-48 web interface switches to cisco stack c2960s switches and this is my first time to make full configuration in stack switches, ...
HiThanks for your reply If I want to access asdm from outside interface after the asa connect to Client's network and get the dhcp public ip address from ISP, please check the configuration if I miss something ?
Hi Andresfr
Thanks for your reply
in main office the vlan server (120), voice vlan (130) and all vlans are already configured so the problem the high traffic between main office and branch (trunk already configured between them)
Site_A_SW# con...
thanks for your replies
do to i have more than 10 vlans, so i should use trunk to allow different vlans
in this case i will configure only :
1- vlans
2- trunk in tagged vlan ports
3- access in untagged vlan ports
4- combine all ports in 2 swit...