About mdavismedco

mdavismedco · 03-21-2012

I know this is a pretty typical way to start this off but I am a bit of a newbie with VLANs and Cisco equipment. I am attempting to setup a communication between 2 VLANs. This setup is between two seperate medical practices Client1 who I have access ...

mdavismedco · 03-21-2012

Looks like it is working! Thanks! Now I need to add routes.

mdavismedco · 03-21-2012

when I enter the nat (inside) 1 access-list NAT-TO-OUTSIDE i get the error:ERROR: Deny rules not supported in policy Nat

mdavismedco · 03-21-2012

Working! Reply from 192.168.51.101: bytes=32 time=1ms TTL=128Reply from 192.168.51.101: bytes=32 time=1ms TTL=128Reply from 192.168.51.101: bytes=32 time=1ms TTL=128Reply from 192.168.51.101: bytes=32 time=1ms TTL=128Reply from 192.168.51.101: bytes=...

mdavismedco · 03-21-2012

See below for that access-list command.TEXASVOICE# conf tTEXASVOICE(config)# access-list NAT-TO-OUTSIDE extended deny ip 192.168.51.0 2$WARNING: found duplicate elementTEXASVOICE(config)# exitTEXASVOICE# show run: Saved:ASA Version 8.2(5)!hostname T...

mdavismedco · 03-21-2012

TEXASVOICE# packet-tracer input inside icmp 192.168.51.100 0 0 192.168.50.100Phase: 1Type: ROUTE-LOOKUPSubtype: inputResult: ALLOWConfig:Additional Information:in 192.168.50.0 255.255.255.0 dmzPhase: 2Type: ACCESS-LISTSubtype: logResult: ALLOW...

Member Since	‎03-21-2012 10:27 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	18

User Statistics

User Activity

ASA 5505 VLAN bi-directional communication issue, no Security Plus

ASA 5505 VLAN bi-directional communication issue, no Security Pl

ASA 5505 VLAN bi-directional communication issue, no Security Pl

ASA 5505 VLAN bi-directional communication issue, no Security Pl

ASA 5505 VLAN bi-directional communication issue, no Security Pl

ASA 5505 VLAN bi-directional communication issue, no Security Pl