About bonnardopjl

bonnardopjl · 10-14-2013

Hi,Using IOS 15.0(2)SG on a cat 4506E with SUP6-LE,I want to control how the interfaces are confugured.So I wrote the following :event manager environment mapping interface TenGigabitEthernet4/6event manager applet Block-Mappingevent manager applet T...

bonnardopjl · 12-09-2013

Bingo, Joseph !!In fact, the TACACS server in my lab was not reachable during my last test session.With the TACACS server up and running, it takes about additional 100ms to configure a vlan mapping, which is acceptable.I keep in mind "event manager...

bonnardopjl · 12-06-2013

Ok, Joseph, I managed to use context, because the implementation using environment variable was very slow.Applet Track-Int-Config is now working very fast.I not very happy with applet Block-Mapping, it takes 8" to execute following: action 4.5 cl...

bonnardopjl · 10-18-2013

Puts works fine. I did not implement the context management.However, making the applet synchronous produces blank line.Could I avoid the blank line ??=======================Switch(config-if)#int t4/6Switch(config-if)#switchport vlan mapping 223 dot1q...

bonnardopjl · 10-15-2013

so, the second applet should be:event manager applet Block-Mappingevent cli pattern "^sw(.*)vl(.*)" sync yes skip yesaction 0.3 string last "TenGigabitEthernet1/1" "$mapping"action 1.0 if $_string_result eq 10event manager applet Block-Mappingevent ...

bonnardopjl · 10-14-2013

Thank you, Joseph.So using "context" is a little bit more complex to manage, just there is no change to the configuration.On the other hand, it is not so bad to have an indication about the last interface configured.This can help to track odd confi...

Member Since	‎08-17-2007 08:44 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	16

User Statistics

User Activity

Controlling config-if statement for given interfaces

Controlling config-if statement for given interfaces

Controlling config-if statement for given interfaces

Controlling config-if statement for given interfaces

Controlling config-if statement for given interfaces

Controlling config-if statement for given interfaces