About sherrick

sherrick · 11-13-2020

We were replacing a router at a location where our WAN provider has a 1000BaseLX handoff with auto-negotiation OFF. Our previous router was an ISR4321 that had auto-negotiation ON, so we duplicated that configuration on our new router - an ASR920. Ho...

sherrick · 08-10-2020

I have a PnP server and I had some routers today give a WORK-RESPONSE with Error Code 1816. Other PnP errors typically come with error messages explaining what the error means, but this one doesn't.Is there a resource of PnP error codes from Cisco? F...

sherrick · 07-24-2020

Hello, Our company receives ASR920 routers from our VAR with a permanent metroipaccess license. When we configure new devices and go to reload them, we get a prompt saying the EULA hasn't been accepted: Router#reload % Unfortunately EULA is not dete...

sherrick · 08-21-2019

Hello, I'm running into issues running a packet capture on an ASR920 (using configurations that work on other router models). When setting up an ip cef capture point, the captures are coming up with no data. Tried testing on a physical interface and ...

sherrick · 07-31-2019

Hello all, I have an ISR4351 on IOS version 16.9.3 connected to a Cisco PnP server via its management interface. I'm able to push a full configuration to the device, but once the config is on the ISR it starts behaving strangely in the CLI. I'm conso...

sherrick · 08-02-2019

Figured out the answer, for those interested: The PnP portion worked fine. After the full config file was transferred, the router performs a "configure replace" (or at least performs a function that is very similar). The rollback feature was triggere...

Member Since	‎06-05-2018 10:43 AM
Date Last Visited	‎11-16-2020 04:55 AM
Posts	7
Total Helpful Votes Received	5

User Statistics

User Activity

Auto-negotiation and Fiber SFP Interfaces

PnP Service Error 1816

ASR920 metroipaccess license EULA

Embedded Packet Capture on ASR920

Cisco PnP Rollback - ISR4351

Re: Cisco PnP Rollback - ISR4351