About patoh

patoh · 05-19-2020

Hi All,I'm working on telemetry monitoring system for asr9k running 64bit 6.6.3 and I would like to know how to monitor environmental data.I already tried these paths but those do not work. Sensor Group Id:GNMI__17350248608601263115_4 Sensor Pat...

patoh · 04-19-2020

Hello All,Could anyone suggest what is the proper way to enable gRPC server on asr9k running IOSXR 6.6.3 64-bit?My setup:asr9k router - {other routers} - servers running VM with telegraf docker- VM is able to reach asr9k Loopback in VRF (ping/ssh)- g...

patoh · 03-04-2020

Hello All,I'm interested to know if anyone is running telegraf with cisco_telemetry_gnmi plugin. I run into multiple issues (not much docs available online) for which I might open separate discussion later.Currently I would like to know if anyone is ...

patoh · 05-26-2020

hi Greg,I think it wasn't clear from beginning that you are running Internet table in GRT.to your concern: I'm concerned with how the border routers will cope with the label assignment to each of the prefixes in the global routing table.I think this ...

patoh · 05-20-2020

these seems to be working, so you have to specifically choose which data you want :) Sensor Group Id:GNMI__4006224086262821962_4 Sensor Path: Cisco-IOS-XR-sysadmin-envmon-ui:environment/oper/temperatures Sensor Path State: Resolved ...

patoh · 04-20-2020

I got confirmation from Cisco Engineer that this setup gRPC in VRF is not fully supported at the moment.there are two workarounds:1) use gRPC server in VRF using MGMT port as source interface, collector also has to be reachable via MGMT interface.the...

patoh · 04-19-2020

hi @narvenka my experience is that not all models listed in repo for specific version (https://github.com/YangModels/yang/tree/master/vendor/cisco/xr) are supported.I found useful to check supported models via netconf: ssh <router> -s netconf see mor...

patoh · 03-05-2020

thanks @smilstea using openconfig-network-instance.yang solved the problem$ pyang -f tree openconfig-network-instance.yang --tree-path=/network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/state module: open...

Member Since	‎06-07-2018 04:48 AM
Date Last Visited	‎11-11-2020 07:27 AM
Posts	11
Total Helpful Votes Received	5

User Statistics

User Activity

asr9k eXR 6.6.3 telemetry support for environment data

gRPC server configuration for eXR 6.6.3 on asr9k

testing telemetry on xrv9k 6.6.3

Re: BGP free core and the internet route table

Re: asr9k eXR 6.6.3 telemetry support for environment data

Re: gRPC server configuration for eXR 6.6.3 on asr9k

Re: How to derive eXR Telemetry Yang path using pyang

Re: testing telemetry on xrv9k 6.6.3