In CCM, is the gateway in a device pool with a CCM group that includes both the pub and sub? Michael

Welcome back, Rob. I'm truly sorry about the bad news. I recently (April) took the SP and also found...

You need to be sure to configure an explict inbound pots dial peer. Unlike other platforms, calls th...

That's cool. We're saying basically the same thing.My point was that from:GK1#sh gatek end GATEKEEPE...

Sankar, A couple questions:1) Are you placing the call on hold or transferring during your test? If ...

You're not doing anything wrong.IP2IP gateway, then later the new Session Border Controller function...

I'm glad you configured it. But I have to disagree. The endpoint "GKProxy" will register as soon as ...

Hi Sankar, Do you have the global command "proxy h323" in your config?Michael

Seems to me that for #3, there are potentially issues. I haven't worked with Parent/Child. But I hav...

I suspect the problem is not with the alias statement but rather with anonymous device support in CC...

Absolutely, but it is the only way I can see to meet the original requirement.

Hi Martin,Great discussion/exploration!No worries. I thought I was misreading. Just wanted to be sur...

1) Yes. 2) I would place it in a separate local zone so I can specify bandwidth for that zone. Probl...

Take a look at the following from the CCM 4.x Solution Network Reference Design (SRND). It describes...