I'm trying to develop an understanding of MPLS-VPNs. I'm currently interested in NAT at the CE router. Most configuration guides I see reference NAT at the PE:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/xe-16/nat-x...
I understand that Route Distinguishers are not required for VRF-lite configurations.
Also, I understand that Route Distinguishers are only required when routing VRFs through BGP.
My question is if the above is true, must Route Distinguishers be c...
Spoiler
I'm trying to configure ospf over ip unnumbered interfaces. I'm seeing conflicting information as to whether or not this is possible, or under what conditions it's possible. I'm about to wave the white flag and state that while the config...
I was able to lab this up in GNS3. My current understanding:
Route Distinguishers are significant on Provider Edge (PE) routers, running MP-BGP. They need not be configured on internal customer routers running VRF-lite.
It appears as though it's not possible to enable ospf on an unnumbered SVI. Note: sh ip ospf neigh return nothing in each case.
Switch1 (C3750)
#sh ip ospf
Routing Process "ospf 1" with ID 1.1.1.1 Start time: 4w3d, Time elapsed: 00:03:15.312 Supp...